XVT-2304 Habasit Conveyor Belt

Main industry segments

 Baked snacks, Biscuit and Crackers, Bread, Chocolate, Convenience food, Frozen food, Pasta, Pastry, Pizza, Primary food packaging, Ready meals

Applications

 Accumulation belt, Cooling (line) belt, Food processing/conveying belt, Infeed belt, Inspection/control belt, Metering/singulation belt, Miniconveyor belt, Packaging belt, Processing belt, Transfer belt, Weighing belt

Special features

 Abrasion resistant, Easy cleanability

Product Construction / Design

Conveying Side Material 
Thermoplastic polyurethane (TPU)
Conveying Side Surface 
Matt
Conveying Side Property
Non-Adhesive
Conveying Side Color
White
Traction Layer (Material)
Polyester (PET)
Number of Fabrics
2
Pulley Side Material
Polyester (PET)
Pulley Side Surface
Impregnated fabric
Pulley Side Property
Non-adhesive
Pulley Side Color
White

Product Characteristics 

Antistatically equipped
Yes
Adhesive free joining method
Yes
Flammability
No specific flammability property
Food Suitablilty, FDA Conformance
 Yes - Check Document of Compliance (DoC) in Habasit Portal​
Food Suitability, USDA Conformance
No use intended
Food Suitability, EU Conformance
 Yes - Check Document of Compliance (DoC) in Habasit Portal​
Other conformance
Halal certified

Technical Data 

Thickness of Belt 
1.5 mm
0.06 inch
Mass of Belt (belt weight)
1.7 kg/m²
0.348 lb/sqft
Tensile force for 1% elongation (k1% static) per unit of width (Habasit standard SOP3-155)

Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181)
9.0 N/mm
​

6.0 N/mm
51 lb/in

​
34 lbf/in
Min. Operating Temperature Admissible (continuous)
-30 °C
-22 °F
Max. Operating Temperature Admissible (continuous)
80 °C
176 ​°F
Coefficient of friction (pulley side / steel driving pulley) ​
0.15
-
Coefficient of friction (pulley side / driving pulley with friction cover) ​
0.35
-
Coefficient of friction (pulley side / pickled steel slider bed)​​
0.20
-
Coefficient of friction (pulley side / phenolic resin slider bed)
0.20
-
Coefficient of friction (pulley side / stainless steel slider bed)
0.15
-
Seamless manufacturing width
4000 mm
157.48 inch
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties

Joining Method 

Flexproof 10x80
Pulley diameter (minimum)
mm/inch
20/0.79
​Pulley diameter minimum with counter flection
mm/inch
30/1.18
​Admissible tensile force per unit of width

 Admissible tensile force per unit of width at max. operating temperature
N/mm
​lbf/in
15
86

8.0
46
Slider bed suitable
-
Yes
Carrying rollers suitable
-
Yes
​Troughed installation suitable
-
No
​Powerturns / curved installations
-
No
Knife-edge (nosebar) radius (minimum)
mm/inch
4/0.157
​Metal detector suitable
-
Yes
Low noise applications
-
No

Chemical Resistance

Link to 'Chemical Resistance Information': https://rims.habasit.com

Mode of Use or Conveyance 

Horizontal, Inclined

Calculations 

For most applications calculation is not required. Should you still need a calculation: please ask Habasit.​

Recommendation


Do not go below initial elongation (epsilon) ~ 0.3%, Install the slack belt and tension until running perfectly under the full belt load

​Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging. Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"

​If High Frequency (HF) system is used check belt heating, Not suitable for wet operations combined with increased temperatures and with extreme greasy and oily conditions, This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment, Use cleaning agent as prescribed by the machine or cleaning agent manufacturer​