XVT-2236 Habasit Folder-Gluer Belts
Main Industry Segments
Cardboard converting, Paper manufacturing and processing
Applications
Folder-gluer belt, Processing belt, Tubewinder belt
Special Features
Abrasion resistant, Adhesive-free joint, Constant coefficient of friction, Dimensionally stable, Forgiving in case of short term shock like overloads, Robustness
|
|
Product Construction / Design
Conveying Side Material |
Acrylonitrile-Butadiene-Rubber (NBR) |
Conveying Side Surface |
Rough structure |
Conveying Side Property |
Adhesive |
Conveying Side Color |
Light green |
Traction Layer (Material) |
Polyamide (PA) |
Number of Fabrics |
2 |
Pulley Side Material |
Acrylonitrile-Butadiene-Rubber (NBR) |
Pulley Side Surface |
Rough structure |
Pulley Side Property |
Adhesive |
Pulley Side Color |
Yellow |
Product Characteristics
Adhesive Free Joining Method |
No |
Food Suitablilty, FDA Conformance |
No |
Food Suitablilty, EU Conformance |
No |
Technical Data
Thickness of Belt |
6.0 mm |
0.24 Inch |
Mass of Belt (belt weight) |
7.1 kg/m |
1.454 lb/sqft |
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155) |
7.5 N/mm |
43 lbf/in |
Min. Operating Temperature Admissible (continuous) |
0 C |
32 F |
Max. Operating Temperature Admissible (continuous) |
100 C |
212 F |
Seamless Manufacturing Width |
1140 mm |
44.88 Inch |
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Joining Method |
Thermofix 75° |
link to Chemical resistance information: https://rims.habasit.com
Pulley Diameter (minimum) |
mm/inch |
60/2.36 |
Pulley Diameter Minimum with Counter Flection |
mm/inch |
60/2.36 |
Slider Bed Suitable |
Value |
No |
Carrying Rollers Suitable |
Value |
Yes |
Chemical Resistance
Link to 'Chemical Resistance Information
Mode of Use or Conveyance
Declined, Horizontal, Inclined, Twists, Twists with short center distance, Vertical
Calculations
For most applications calculation is not required. Should you still need a calculation: please ask MIB.
Recommendation
Do not go below initial elongation (epsilon) ~ 0.5%, Install the slack belt and tension until running perfectly under the full belt load
Store spare belts in a cool and dry place and if possible in their original packaging. Protect spare belts from sunlight/UV-radiation/dust/dirt! Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"
Belt speed must not exceed 300m/min, This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment
Store spare belts in a cool and dry place and if possible in their original packaging. Protect spare belts from sunlight/UV-radiation/dust/dirt! Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"
Belt speed must not exceed 300m/min, This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment