WVT-143 Habasit Conveyor Belt
Main industry segments
Biscuit and Crackers, Candy, Chewing gum, Chocolate, Plastics
Applications
Decline belt, Food processing/conveying belt, Incline belt
Special features
Easy release, High temperature resistant, Wear resistant
|
|
Product Construction / Design
Conveying Side Material |
Silicone (SI) |
Conveying Side Surface |
Smooth |
Conveying Side Property |
Super-adhesive |
Conveying Side Color |
White |
Traction Layer (Material) |
Polyester (PET) |
Number of Fabrics |
1 |
Pulley Side Material |
Polyester (PET) |
Pulley Side Surface |
Impregnated fabric |
Pulley Side Property |
Non-adhesive |
Pulley Side Color |
White |
Product Characteristics
Antistatically equipped |
Yes |
Adhesive free joining method |
Yes |
Food Suitablilty, FDA Conformance |
Yes - Check Document of Compliance (DoC) in our Portal |
Food Suitability, EU Conformance |
Yes - Check Document of Compliance (DoC) in our Portal |
Other conformance/approval |
Complies with: BfR recommendation (German federal institute for risk assessment) , Japanese Food Regulation (MHLW Notification No. 370) |
Technical Data
Thickness of Belt |
1.20 mm |
0.05 inch |
Mass of Belt (belt weight) |
1.2 kg/m² |
0.246 lb/sqft |
Tensile force for 1% elongation (k1% static) per unit of width (Habasit standard SOP3-155) Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181) |
6.5 N/mm 4.6 N/mm |
37 lb/in 26 lbf/in |
Min. Operating Temperature Admissible (continuous) |
-30 °C |
-22 °F |
Max. Operating Temperature Admissible (continuous) |
150 °C |
302 °F |
Coefficient of friction (pulley side / steel driving pulley) |
0.15 |
- |
Coefficient of friction (pulley side / driving pulley with friction cover) |
0.35 |
- |
Coefficient of friction (pulley side / pickled steel slider bed) |
0.20 |
- |
Coefficient of friction (pulley side / phenolic resin slider bed) |
0.20 |
- |
Coefficient of friction (pulley side / stainless steel slider bed) |
0.20 |
- |
Seamless manufacturing width |
1500 mm |
59.06 inch |
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Joining Method |
Flexproof 10 x 80 |
Pulley diameter (minimum) |
mm/inch |
15/0.59 |
Pulley diameter minimum with counter flection |
mm/inch |
25/0.98 |
Admissible tensile force per unit of width Admissible tensile force per unit of width at max. operating temperature |
N/mm lbf/in |
4.0 23 2.2 13 |
Slider bed suitable |
- |
Yes |
Carrying rollers suitable |
- |
Yes |
Troughed installation suitable |
- |
No |
Powerturns / curved installations |
- |
No |
Knife-edge (nosebar) radius (minimum) |
mm/inch |
4/0.157 |
Metal detector suitable |
- |
Yes |
Chemical Resistance
Link to 'Chemical Resistance Information': https://rims.habasit.com
Mode of Use or Conveyance
Declined, Horizontal, Inclined
Calculations
For most applications calculation is not required. Should you still need a calculation: please ask Habasit.
Recommendation
Do not go below initial elongation (epsilon) ~ 0.3%
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.