VT-2342 Habasit Conveyor Belt

Main industry segments

Cardboard converting, Paper manufacturing and processing, Paper printing and finishing, Secondary packaging

Applications

Paper handling belt, Processing belt 

Special features

Abrasion resistant, Adhesive-free joint, Constant coefficient of friction, High coefficient of friction surface, Oil resistant 

Product Construction / Design

Conveying Side Material 
Acrylonitrile-Butadiene-Rubber (NBR) 
Conveying Side Surface 
Coarse textile structure 
Conveying Side Property
Adhesive
Conveying Side Color
Green
Traction Layer (Material)
 Polyamide (PA) fabric / Hamid foil
Number of Fabrics
2
Pulley Side Material
Polyurethane cross-linked (PUR)
Pulley Side Surface
Impregnated fabric
Pulley Side Property
Non-adhesive
Pulley Side Color
Black

Product Characteristics 

Antistatically equipped
Yes
Adhesive free joining method
Yes
Flammability
No specific flammability prevention property
Food Suitablilty, FDA Conformance
No
Food Suitability, USDA Conformance
No use intended
Food Suitability, EU Conformance
No

Technical Data 

Thickness of Belt 
2.9 mm
0.11 inch
Mass of Belt (belt weight)
3.1 kg/m²
0.635 lb/sqft
Tensile force for 1% elongation (k1% static) per unit of width (Habasit standard SOP3-155)

Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181)
8.0 N/mm
​

4.0 N/mm
46 lb/in

​
23 lbf/in
Min. Operating Temperature Admissible (continuous)
0 °C
32 °F
Max. Operating Temperature Admissible (continuous)
70 °C
158 ​°F
Coefficient of friction (pulley side / steel driving pulley) ​
0.10
-
Coefficient of friction (pulley side / driving pulley with friction cover) ​
0.35
-
Coefficient of friction (pulley side / pickled steel slider bed)​​
0.15
-
Coefficient of friction (pulley side / phenolic resin slider bed)
0.15
-
Coefficient of friction (pulley side / stainless steel slider bed)
0.15
-
Seamless manufacturing width
1140 mm
44.88 inch
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties

Joining Method 

Flexproof 8 x 30
Pulley diameter (minimum)
mm/inch
50/1.97
​Pulley diameter minimum with counter flection
mm/inch
60/2.36
​Admissible tensile force per unit of width

 Admissible tensile force per unit of width at max. operating temperature
N/mm
​lbf/in
10
​57

10
​57
Slider bed suitable
-
Yes
Carrying rollers suitable
-
Yes
​Troughed installation suitable
-
No
​Powerturns / curved installations
-
No
Knife-edge (nosebar) suitable
-
No
​Metal detector suitable
-
No
Low noise applications
-
No

Chemical Resistance

Link to 'Chemical Resistance Information': https://rims.habasit.com

Mode of Use or Conveyance 

Declined, Horizontal, Inclined​

Calculations 

For most applications calculation is not required. Should you still need a calculation: please ask Habasit.​

Recommendation

Do not go below initial elongation (epsilon) ~ 0.3%, Install the slack belt and tension until running perfectly under the full belt load

tore spare belts in a cool and dry place and if possible in their original packaging. Protect spare belts from sunlight/UV-radiation/dust/dirt! Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"

This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment