UMS130SC-B Habasit Conveyor Belt
Main industry segments
Airport, Distribution centers
Applications
Accumulation belt, Diverting belt, Transfer belt
Special features
Abrasion resistant on both sides, Absorption of shock loads, Anti-scuff cover, Antistatic, Cut resistant, Edges wear resistant, Good lace retention, Impact resistant, Low noise applications suitable
|
|
Product Construction / Design
Conveying Side Material |
Polyester (PET) fleece |
Conveying Side Surface |
Impregnated fleece |
Conveying Side Property |
Non-adhesive |
Conveying Side Color |
Black |
Traction Layer (Material) |
Polyester (PET) scrim |
Number of Fabrics |
1 |
Pulley Side Material |
Polyester (PET) fleece |
Pulley Side Surface |
Impregnated fabric |
Pulley Side Property |
Non-adhesive |
Pulley Side Color |
Black |
Product Characteristics
Antistatically equipped |
Yes - fulfills EN 12882 / Categorie 1 |
Adhesive free joining method |
- |
Flammability |
No specific flammability prevention property |
Food Suitablilty, FDA Conformance |
No |
Food Suitability, USDA Conformance |
No use intended |
Food Suitability, EU Conformance |
No |
Technical Data
Thickness of Belt |
3.3 mm |
0.13 inch |
Mass of Belt (belt weight) |
2.1 kg/m² |
0.430 lb/sqft |
Tensile force for 1% elongation (k1% static) per unit of width (Habasit standard SOP3-155) Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181) |
20 N/mm 7.5 N/mm |
115 lb/in 43 lbf/in |
Min. Operating Temperature Admissible (continuous) |
-12 °C |
10 °F |
Max. Operating Temperature Admissible (continuous) |
80 °C |
176 °F |
Coefficient of friction (pulley side / steel driving pulley) |
0.25 |
- |
Coefficient of friction (pulley side / driving pulley with friction cover) |
0.35 |
- |
Coefficient of friction (pulley side / pickled steel slider bed) |
0.30 |
- |
Coefficient of friction (pulley side / phenolic resin slider bed) |
0.30 |
- |
Coefficient of friction (pulley side / stainless steel slider bed) |
0.25 |
- |
Seamless manufacturing width |
1829 mm |
72.00 inch |
On request other seamless manufacturing width |
1524 mm |
60 inch |
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Joining Method |
Clipper #1 (Master joining method for standard applications)
|
Joining method |
Unit |
Clipper #1 |
Flexproof 20x80 |
Pulley diameter (minimum) |
mm/inch |
50/1.97 |
51/2.00 |
Pulley diameter minimum with counter flection |
mm/inch |
64/2.50 |
51/2.00 |
Admissible tensile force per unit of width Admissible tensile force per unit of width at max. operating temperature |
N/mm lbf/in |
14 82 9.3 53 |
|
Slider bed suitable |
- |
Yes |
Yes |
Carrying rollers suitable |
- |
Yes |
Yes |
Troughed installation suitable |
- |
No |
Yes |
Powerturns / curved installations |
- |
Yes |
Yes |
Knife-edge (nosebar) suitable |
- |
No |
No |
Low noise applications |
- |
Yes |
Yes |
Metal detector suitable |
- |
No |
No |
Chemical Resistance
Link to 'Chemical Resistance Information': https://rims.habasit.com
Mode of Use or Conveyance
Accumulation, Diverting, Horizontal, Side loading
Calculations
For most applications calculation is not required. Should you still need a calculation: please ask Habasit.
Recommendation
-