UM140HMSD-B Habasit Conveyor Belt
Main industry segments
Distribution centers, Parcel distribution / Overnight carrier
Applications
Live roller drive belt, Packaging belt
Special features
Abrasion resistant on both sides, Absorption of shock loads, Antistatic, Edges wear resistant, Excellent tracking, Good lace retention, Impact resistant, Low noise applications suitable
|
|
Product Construction / Design
Conveying Side Material |
Polyurethane cross-linked (PUR) |
Conveying Side Surface |
Impregnated fleece |
Conveying Side Property |
Adhesive |
Conveying Side Color |
Black |
Traction Layer (Material) |
Polyester (PET) scrim |
Number of Fabrics |
1 |
Pulley Side Material |
Polyester (PET) scrim |
Pulley Side Surface |
Buffed finish |
Pulley Side Property |
Non-adhesive |
Pulley Side Color |
Black |
Product Characteristics
Antistatically equipped |
Yes |
Adhesive free joining method |
Yes |
Flammability |
No specific flammability prevention property |
Food Suitablilty, FDA Conformance |
No |
Food Suitability, USDA Conformance |
No use intended |
Food Suitability, EU Conformance |
No |
Technical Data
Thickness of Belt |
3.9 mm |
0.15 inch |
Mass of Belt (belt weight) |
2.4 kg/m² |
0.500 lb/sqft |
Tensile force for 1% elongation (k1% static) per unit of width (Habasit standard SOP3-155) Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181) |
21 N/mm 7.5 N/mm |
120 lb/in 43 lbf/in |
Min. Operating Temperature Admissible (continuous) |
-12 °C |
10 °F |
Max. Operating Temperature Admissible (continuous) |
80 °C |
176 °F |
Coefficient of friction (pulley side / steel driving pulley) |
0.15 |
- |
Coefficient of friction (pulley side / driving pulley with friction cover) |
0.35 |
- |
Coefficient of friction (pulley side / pickled steel slider bed) |
0.25 |
- |
Coefficient of friction (pulley side / phenolic resin slider bed) |
0.25 |
- |
Coefficient of friction (pulley side / stainless steel slider bed) |
0.20 |
- |
Seamless manufacturing width |
1829 mm |
72.00 inch |
On request other seamless manufacturing width |
1524 mm |
60 inch |
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Joining Method |
Flexproof (Master joining method for standard applications)
|
Joining method |
Unit |
Flexproof |
Clipper #1-A |
Clipper #2 SP |
Clipper #1 |
Pulley diameter (minimum) |
mm/inch |
51/2.00 |
51/2.00 |
51/2.00 |
2/0.08 |
Pulley diameter minimum with counter flection |
mm/inch |
64/2.50 |
64/2.50 |
64/2.50 |
64/2.50 |
Admissible tensile force per unit of width Admissible tensile force per unit of width at max. operating temperature |
N/mm lbf/in |
13 73 6.7 38 |
|||
Slider bed suitable |
- |
Yes |
Yes |
Yes |
Yes |
Carrying rollers suitable |
- |
Yes |
Yes |
Yes |
Yes |
Troughed installation suitable |
- |
Yes |
Yes |
Yes |
Yes |
Powerturns / curved installations |
- |
Yes |
Yes |
Yes |
Yes |
Knife-edge (nosebar) suitable |
- |
No |
No |
No |
No |
Low noise applications |
- |
Yes |
Yes |
Yes |
Yes |
Metal detector suitable |
- |
No |
No |
No |
No |
Chemical Resistance
Link to 'Chemical Resistance Information': https://rims.habasit.com
Mode of Use or Conveyance
Horizontal, Live roller drive
Calculations
For most applications calculation is not required. Should you still need a calculation: please ask Habasit.
Recommendation
Install the slack belt and tension until running perfectly under the full belt load
Store spare belts in a cool and dry place and if possible in their original packaging. Protect spare belts from sunlight/UV-radiation/dust/dirt! Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"
Store spare belts in a cool and dry place and if possible in their original packaging. Protect spare belts from sunlight/UV-radiation/dust/dirt! Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"