TT25 EMB Habasit Conveyor Belt

Main industry segments

 Convenience food, Dairy (incl. cheese), Pet food, Poultry, Red meat

Applications

 Decline belt, Food processing/conveying belt, Incline belt

Special features

 Abrasion resistant, High grip surface, Oil and fat resistant, Small pulley diameter suitable

Product Construction / Design

Conveying Side Material 
Thermoplastic polyurethane (TPU)
Conveying Side Surface 
Square structure
Conveying Side Property
Adhesive
Conveying Side Color
White
Traction Layer (Material)
 Polyester (PET)
Number of Fabrics
2
Pulley Side Material
 Polyester (PET)
Pulley Side Surface
Impregnated fabric
Pulley Side Property
Non-adhesive
Pulley Side Color
White

Product Characteristics 

Antistatically equipped
No
Adhesive free joining method
Yes
Flammability
No specific flammability prevention property
Food Suitablilty, FDA Conformance
 Yes - Check Document of Compliance (DoC) in our Portal
Food Suitability, USDA Conformance
No use intended
Food Suitability, EU Conformance
 Yes - Check Document of Compliance (DoC) in our Portal

Technical Data 

Thickness of Belt 
1.6 mm
0.06 inch
Mass of Belt (belt weight)
1.7 kg/m²
0.348 lb/sqft
Tensile force for 1% elongation (k1% static) per unit of width (Habasit standard SOP3-155)

Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181)
10 N/mm
​

7.5 N/mm
57 lb/in

​
43 lbf/in
Min. Operating Temperature Admissible (continuous)
-20 °C
-4 °F
Max. Operating Temperature Admissible (continuous)
100 °C
212 ​°F
Coefficient of friction (pulley side / steel driving pulley) ​
0.10
-
Coefficient of friction (pulley side / driving pulley with friction cover) ​
0.35
-
Coefficient of friction (pulley side / pickled steel slider bed)​​
0.15
-
Coefficient of friction (pulley side / phenolic resin slider bed)
0.15
-
Coefficient of friction (pulley side / stainless steel slider bed)
0.15
-
Seamless manufacturing width
2000 mm
78.74 inch
On request other seamless manufacturing width
1500 mm
59 inch
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties

Joining Method 

Flexproof 10 x 80
Pulley diameter (minimum)
mm/inch
50/1.97
​Pulley diameter minimum with counter flection
mm/inch
80/3.15
​Admissible tensile force per unit of width

 Admissible tensile force per unit of width at max. operating temperature
N/mm
​lbf/in
19
108

7.5
​43
Slider bed suitable
-
Yes
Carrying rollers suitable
-
Yes
​Troughed installation suitable
-
No
​Powerturns / curved installations
-
No
Knife-edge (nosebar) suitable
-
No
​Metal detector suitable
-
Yes

Chemical Resistance

Link to 'Chemical Resistance Information': https://rims.habasit.com

Mode of Use or Conveyance 

Declined, Horizontal, Inclined

Calculations 

For most applications calculation is not required. Should you still need a calculation: please ask Habasit.​

Recommendation

 Do not go below initial elongation (epsilon) ~ 0.3%

Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging. Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"

​This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment