TMIPH135LR Habasit Conveyor Belt
Main industry segments
Airport, Distribution centers, Parcel distribution / Overnight carrier
Applications
Acceleration belt, Decline belt, Incline belt, Induction belt, Metering/singulation belt
Special features
Flame retardant, Good lace retention, High grip surface, High tensile strength, Low noise applications suitable, No delamination
|
|
Product Construction / Design
Conveying Side Material |
Polyvinylchloride (PVC) |
Conveying Side Surface |
Longitudinal groove structure |
Conveying Side Property |
Super-adhesive |
Conveying Side Color |
Black |
Traction Layer (Material) |
Polyester (PET) scrim |
Number of Fabrics |
1 |
Pulley Side Material |
Polyester (PET) fleece |
Pulley Side Surface |
Impregnated fleece |
Pulley Side Property |
Non-adhesive |
Pulley Side Color |
Black |
Product Characteristics
Antistatically equipped |
No |
Adhesive free joining method |
Yes |
Flammability |
Flame retardant, Flame retardant to ASTM D-378 |
Food Suitablilty, FDA Conformance |
No |
Food Suitability, USDA Conformance |
No use intended |
Food Suitability, EU Conformance |
No |
Technical Data
Thickness of Belt |
4.4 mm |
0.17 inch |
Mass of Belt (belt weight) |
4.3 kg/m² |
0.880 lb/sqft |
Tensile force for 1% elongation (k1% static) per unit of width (Habasit standard SOP3-155) Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181) |
24 N/mm 8.2 N/mm |
135 lb/in 47 lbf/in |
Min. Operating Temperature Admissible (continuous) |
-23 °C |
-10 °F |
Max. Operating Temperature Admissible (continuous) |
80 °C |
176 °F |
Coefficient of friction (pulley side / steel driving pulley) |
0.25 |
- |
Coefficient of friction (pulley side / driving pulley with friction cover) |
0.35 |
- |
Coefficient of friction (pulley side / pickled steel slider bed) |
0.30 |
- |
Coefficient of friction (pulley side / phenolic resin slider bed) |
0.25 |
- |
Coefficient of friction (pulley side / stainless steel slider bed) |
0.20 |
- |
Seamless manufacturing width |
1829 mm |
72.00 inch |
On request seamless manufacturing width |
1524 mm |
60 inch |
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Joining Method |
Clipper #1
|
Pulley diameter (minimum) |
mm/inch |
51/2.00 |
51/2.00 |
51/2.00 |
Pulley diameter minimum with counter flection |
mm/inch |
64/2.50 |
64/2.50 |
64/2.50 |
Admissible tensile force per unit of width Admissible tensile force per unit of width at max. operating temperature |
N/mm lbf/in |
20 117 15 84 |
- |
- |
Slider bed suitable |
- |
Yes |
Yes |
Yes |
Carrying rollers suitable |
- |
Yes |
Yes |
Yes |
Troughed installation suitable |
- |
No |
No |
No |
Powerturns / curved installations |
- |
Yes |
Yes |
Yes |
Knife-edge (nosebar) suitable |
- |
No |
No |
No |
Metal detector suitable |
- |
Yes |
Yes |
Yes |
Low noise applications |
- |
Yes |
Yes |
Yes |
Chemical Resistance
Link to 'Chemical Resistance Information': https://rims.habasit.com
Mode of Use or Conveyance
Acceleration, Declined, Inclined, Metering
Calculations
For most applications calculation is not required. Should you still need a calculation: please ask Habasit.
Recommendation
Do not go below initial elongation (epsilon) ~ 0.3%, Install the slack belt and tension until running perfectly under the full belt load
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging. Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"
No danger and limitation
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging. Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"
No danger and limitation