TF-15 Power Transmission Belts
Main Industry Segments
Letter Sorting, Yarn Processing
Applications
Driving Belt, Tangential Belt
Special Features
Abrasion Resistant, Dimensionally Stable, Energy Saving, High Modulus of Elasticity, High Uniformity of Belt Speed, Low Initial Tension, Simple and Fast Joining Method
|
|
Product Construction / Design
Pulley Side Material |
Acrylonitrile-Butadiene-Rubber (NBR) |
Pulley Side Surface |
Rough Structure |
Pulley Side Color |
Black |
Traction Layer (Material) |
Aramid Fabric |
Number of Fabrics |
1 |
Opposite Side Material |
Acrylonitrile-Butadiene-Rubber (NBR) |
Opposite Side Surface |
Fine Structure |
Opposite Side Color |
Green |
Product Characteristics
Drive Determination |
Double-Sided Power Transmission |
Antistatically Equipped |
Yes |
Adhesive Free Joining Method |
Yes |
Food Suitablilty, FDA Conformance |
No |
Food Suitability, EU Conformance |
No |
Technical Data
Thickness of Belt |
2.0 mm |
0.08 Inch |
Mass of Belt (belt weight) |
2.1 kg/m² |
0.430 lb/sqft |
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155) |
15 N/mm |
86 lbf/in |
Nominal Peripheral Force Per Unit of Width |
15 N/mm |
86 lbf/in |
Min. Operating Temperature Admissible (continuous) |
-20 C |
-4 F |
Max. Operating Temperature Admissible (continuous) |
65 C |
149 F |
Seamless Manufacturing Width |
1200 mm |
47.24 Inch |
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Joining Method
|
Flexproof 10 x 120 |
Pulley Diameter (minimum) |
mm/inch |
30/1.18 |
Pulley Diameter Minimum with Counter Flection |
mm/inch |
30/1.18 |
Chemical Resistance
Link to 'Chemical Resistance Information': https://rims.habasit.com
REACH
This product contains more than 0.1% of the following substance(s) of very high concern (SVHC) and is (are) included in the Candidate List. Further information is available from your Habasit representation. Substance(s): 6,6' -di-tert-butyl-2,2" -methylenedi-p-cresol
Mode of Use or Conveyance
Power Transmission, Tangential Drive
Calculations
With power transmission belts a calculation at least of the belt width and initial elongation is highly recommended. For this serves the Habasit SeleCalc calculation program. The easiest way is to have belt drives calculated by Habasit representatives.
Recommendation
Follow the Installing and Maintenance Instructions which are supplied with each product delivery.
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.
Do not force belt on pulleys, Keep belt edges free of any installation/machine contact, This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user's analysis in the respective environment.
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.
Do not force belt on pulleys, Keep belt edges free of any installation/machine contact, This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user's analysis in the respective environment.