TO4 Amber Harlequin Habasit Conveyor Belt

Main industry segments

Chocolate

Applications

 Chocolate cooling/ embossing

Special features

 Abrasion resistant, Knife-edge (nosebar) suitable, Oil and fat resistant, Small pulley diameter suitable

Product Construction / Design

Conveying Side Material 
Thermoplastic polyurethane (TPU)
Conveying Side Surface 
Harlequin structure
Conveying Side Property
Non-adhesive
Conveying Side Color
Amber
Traction Layer (Material)
Polyester (PET)
Number of Fabrics
1
Pulley Side Material
Polyester (PET)
Pulley Side Surface
Impregnated fabric
Pulley Side Property
Non-adhesive
Pulley Side Color
White

Product Characteristics 

Antistatically equipped
No
Adhesive free joining method​
Yes
Flammability
 No specific flammability prevention property
Food Suitablilty, FDA Conformance
 Yes - Check Document of Compliance (DoC) in Habasit Portal
Food Suitability, USDA Conformance
No use intended
Food Suitability, EU Conformance
 Yes - Check Document of Compliance (DoC) in Habasit Portal
Other conformance
 Japanese Food Regulation (MHLW Notification No. 370)

Technical Data 

Thickness of Belt 
0.70 mm
0.03 inch
Mass of Belt (belt weight)
0.80 kg/m²
0.164 lb/sqft
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155)
4.8 N/mm
27 lb/sqft
Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181)
3.2 N/mm
18 lbf/in
Min. Operating Temperature Admissible (continuous)
-10 °C
14 ​°F
Max. Operating Temperature Admissible (continuous)
80 °C
176 °F
Coefficient of friction (pulley side / steel driving pulley) ​
0.10
-
​Coefficient of friction (pulley side / driving pulley with friction cover) ​
0.35
-
Coefficient of friction (pulley side / pickled steel slider bed)
0.15
-
Coefficient of friction (pulley side / phenolic resin slider bed)
0.15
-
Coefficient of friction (pulley side / stainless steel slider bed)
0.15
-
Thermal Resistance
 0.011 m²*K/W
 0.002 Fft²h/Btu
Thermal Conductivity
 0.062 W/m*K
 0.010 W/ft*F
Seamless manufacturing width
2000 mm
78.74 inch
On request other seamless manufacturing width
1530 mm
60 inch
On request further seamless manufacturing width
1330 mm
52 inch
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties

Joining Method 

Flexproof 10 x 80
Pulley diameter (minimum)
mm/inch
15/0.59
​Pulley diameter minimum with counter flection
mm/inch
15/0.59
​Admissible tensile force per unit of width

Admissible tensile force per unit of width at max. operating temperature​
N/mm
​lbf/in
8.0
46

4.6
26
Slider bed suitable
-
Yes
Carrying rollers suitable
-
Yes
​Troughed installation suitable
-
Yes
​Powerturns / curved installations
-
No
Knife-edge (nosebar) radius (minimum)
mm/inch
2/0.079
​Metal detector suitable
-
Yes

Chemical Resistance

Link to 'Chemical Resistance Information': https://rims.habasit.com

Mode of Use or Conveyance 

Horizontal

Calculations 

For most applications calculation is not required. Should you still need a calculation: please ask Habasit.​

Recommendation

 Do not go below initial elongation (epsilon) ~ 0.3%

Store spare belts in a cool and dry place and if possible in their original packaging. Protect spare belts from sunlight/UV-radiation/dust/dirt! Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"

​This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment