SWP/4
​ Habasit Conveyor Belt

Main industry segments

 Cement, General conveying, Plastics

Applications

 Air gravity/air slide membrane

Special features

 Chemical resistant, Temperature variation resistant, UV resistant

Product Construction / Design

Conveying Side Material 
 Polyester (PET)
Conveying Side Surface 
Fabric
Conveying Side Property
Non-adhesive
Conveying Side Color
White
Traction Layer (Material)
 Polyester (PET)
Number of Fabrics
4
Pulley Side Material
 Polyester (PET)
Pulley Side Surface
Fabric
Pulley Side Property
Non-adhesive
Pulley Side Color
White

Product Characteristics 

Antistatically equipped
No
Flammability
 No specific flammability prevention property
Food Suitability, EU Conformance
No
Food Suitablilty, FDA Conformance
 Yes - Check Document of Compliance (DoC) in our Portal
Food Suitability, USDA Conformance
No use intended

Technical Data 

Thickness of Belt 
4.8 mm
0.19 inch
Mass of Belt (belt weight)
3.6 kg/m²
0.740​ lb/sqft
Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181)
10.0 N/mm
57 lb/sqft
Min. Operating Temperature Admissible (continuous)
0 °C
32 °F
Max. Operating Temperature Admissible (continuous)
154 °C
310 ​°F
Coefficient of friction (pulley side / steel driving pulley) ​
0.15
Value
Coefficient of friction (pulley side / driving pulley with friction cover) ​
0.35
-
Coefficient of friction (pulley side / pickled steel slider bed)​​
0.20
-
Coefficient of friction (pulley side / phenolic resin slider bed)
0.25
-
Coefficient of friction (pulley side / stainless steel slider bed)
0.15
-
Seamless manufacturing width
2184 mm
86.00 inch
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties

Joining Method 

Mechanical Joining
or
Sewn Joint (Optional)
Pulley diameter (minimum)
mm/inch
76/3.00
76/3.00
​Pulley diameter minimum with counter flection
mm/inch
89/3.50
89/3.50
​Admissible tensile force per unit of width

Admissible tensile force per unit of width at max. operating temperature​
N/mm
​lbf/in
16
91

16
91
Slider bed suitable
-
No
No
Carrying rollers suitable
-
No
No
​Troughed installation suitable
-
No
No
​Powerturns / curved installations
-
No
No
Knife-edge (nosebar) suitable
-
No
No
​Metal detector suitable
-
No
No

Chemical Resistance

Link to 'Chemical Resistance Information': https://rims.habasit.com

Mode of Use or Conveyance 

Horizontal, Declined, Inclined

Calculations 

For most applications calculation is not required. Should you still need a calculation: please ask Habasit.​

Recommendation

 Install the slack belt and tension until running perfectly under the full belt load

​Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging. Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf" No danger and limitation