S-33/40 Power Transmission Belts
Main Industry Segments
Yarn Processing
Applications
Power Transmission Belt, Tangential Belt
Special Features
Abrasion Resistant, Constant Coefficient of Friction, Forgiving in case of short term shock like overloads, Versatile
|
|
Product Construction / Design
Pulley Side Material |
Acrylontrile-Butadiene-Rubber (NBR) as Friction Cover (Pulley/Cylinder Side) |
Pulley Side Surface |
Rough Structure |
Pulley Side Color |
Yellow |
Traction Layer (material) |
Polyamide (PA) |
Number of Fabrics |
2 |
Opposite Side Material |
Acrylontrile-Butadiene-Rubber (NBR) as Friction Cover (Pulley/Cylinder Side) |
Opposite Side Surface |
Rough Structure |
Opposite Side Color |
Light Green |
Product Characteristics
Drive Determination |
Double-Sided Power Transmission |
Antistatically Equipped |
Yes |
Adhesive Free Joining Method |
No |
Food Suitablilty, FDA Conformance |
No |
Food Suitablilty, EU Conformance |
No |
Technical Data
Thickness of Belt |
4.0 mm |
0.16 Inch |
Mass of Belt (belt weight) |
4.3 kg/m |
0.881 lb/sqft |
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155 / EN ISO 21181) |
13 N/mm |
74 lbf/in |
Nominal Peripheral Force per Unit of Width |
37 N/mm |
211 lbf/in |
Min. Operating Temperature Admissible (continuous) |
-20 C |
-4 F |
Max. Operating Temperature Admissible (continuous) |
100 C |
212 F |
Seamless Manufacturing Width |
1140 mm |
44.88 Inch |
All data are approximate values under standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Joining Method
|
Themofix 75 |
Pulley Diameter (minimum) |
mm/inch |
125/4.92 |
Pulley Diameter Minimum with Counter Flection |
mm/inch |
125/4.92 |
Chemical Resistance
Link to 'Chemical Resistance Information': https://rims.habasit.com
Mode of Use or Conveyance
Power Transmission
Calculations
With power transmission belts a calculation at least of the belt width and initial elongation is highly recommended. For this serves the Habasit SeleCalc calculation program. The easiest way is to have belt dives calculated by Habasit representatives.
Recommendation
Do not go below initial elongation (epsilon) - 0.3%
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.
This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user's analysis in the respective environment.
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.
This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user's analysis in the respective environment.