RPH3-200BXB-FR Habasit Conveyor Belt
Main industry segments
Airport, Distribution centers, Parcel distribution / Overnight carrier
Applications
Accumulation belt, Diverting belt, Pusher belt, Sorting belt
Special features
Abrasion resistant on both sides, Cut resistant, Good lace retention, High abrasion resistance, High strength, High transversal rigidity, Impact resistant, Low noise applications suitable
|
|
Product Construction / Design
Conveying Side Material |
RFL fabric |
Conveying Side Surface |
Impregnated fabric |
Conveying Side Property |
Non-dhesive |
Conveying Side Color |
Black |
Traction Layer (Material) |
Polyester (PET)/Polyamide (PA) fabric |
Number of Fabrics |
3 |
Pulley Side Material |
RFL fabric |
Pulley Side Surface |
Impregnated finish |
Pulley Side Property |
Non-adhesive |
Pulley Side Color |
Black |
Product Characteristics
Antistatically equipped |
Yes |
Adhesive free joining method |
- |
Flammability |
In accordance with ISO 340 |
Food Suitablilty, FDA Conformance |
No |
Food Suitability, USDA Conformance |
No use intended |
Food Suitability, EU Conformance |
No |
Other conformance |
- |
Technical Data
Thickness of Belt |
4.3 mm |
0.17 inch |
Mass of Belt (belt weight) |
4.7 kg/m² |
0.963 lb/sqft |
Tensile force for 1% elongation (k1% static) per unit of width (Habasit standard SOP3-155) Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181) |
30 N/mm 9.4 N/mm |
168 lbf/in 54 lb/sqft |
Min. Operating Temperature Admissible (continuous) |
-29 °C |
-20 °F |
Max. Operating Temperature Admissible (continuous) |
82 °C |
180 °F |
Coefficient of friction (pulley side / steel driving pulley) |
0.15 |
- |
Coefficient of friction (pulley side / driving pulley with friction cover) |
0.35 |
- |
Coefficient of friction (pulley side / pickled steel slider bed) |
0.15 |
- |
Coefficient of friction (pulley side / phenolic resin slider bed) |
0.30 |
- |
Coefficient of friction (pulley side / stainless steel slider bed) |
0.15 |
- |
Seamless manufacturing width |
1524 mm |
60.00 inch |
On request other seamless manufacturing width |
1829 mm |
72 inch |
On request further seamless manufacturing width |
1981 mm |
78 inch |
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Joining Method |
Clipper #3HT ( Master joining method for standard applications)
|
Pulley diameter (minimum) |
mm/inch |
89/3.50 |
89/3.50 |
Pulley diameter minimum with counter flection |
mm/inch |
89/3.50 |
89/3.50 |
Admissible tensile force per unit of width Admissible tensile force per unit of width at max. operating temperature |
N/mm lbf/in |
22 128 14 78 |
14 82 11 63 |
Slider bed suitable |
- |
Yes |
Yes |
Carrying rollers suitable |
- |
Yes |
Yes |
Troughed installation suitable |
- |
No |
No |
Powerturns / curved installations |
- |
No |
No |
Knife-edge (nosebar) suitable |
- |
No |
No |
Metal detector suitable |
- |
No |
No |
Low noise applications |
- |
Yes |
Yes |
Chemical Resistance
Link to 'Chemical Resistance Information': https://rims.habasit.com
Mode of Use or Conveyance
Accumulation, Diverting, Horizontal, Lateral feeding, Side loading
Calculations
For most applications calculation is not required. Should you still need a calculation: please ask Habasit.
Recommendation
Do not go below initial elongation (epsilon) ~ 0.3%
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging. Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"
No danger and limitation
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging. Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"
No danger and limitation