PB-2461 Habasit Conveyor Belt

Main industry segments

Textile printing

Applications

Printing blanket

Special features

High precision, Solvent resistant

Product Construction / Design

Conveying Side Material 
Thermoplastic polyurethane (TPU)
Conveying Side Surface 
Smooth
Conveying Side Property
Non-Adhesive
Conveying Side Color
Black
Traction Layer (Material)
Polyester (PET)
Number of Fabrics
2
Pulley Side Material
Polyester (PET)
Pulley Side Surface
Impregnated Fabric
Pulley Side Property
Non-adhesive
Pulley Side Color
Black

Product Characteristics 

Antistatically equipped
Yes
Adhesive free joining method​
Yes
Flammability
No specific flammability prevention property 
Food Suitablilty, FDA Conformance
Yes - Check Document of Compliance (DoC) in our Portal
Food Suitability, USDA Conformance
No use intended
Food Suitability, EU Conformance
Yes - Check Document of Compliance (DoC) in our Portal
Other conformance
-

Technical Data 

Thickness of Belt 
2.6 mm
0.10 inch
Mass of Belt (belt weight)
2.9 kg/m²
0.594 lb/sqft
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155)
18 N/mm
103 lb/sqft
Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181)
12 N/mm
69 lbf/in
Min. Operating Temperature Admissible (continuous)
-15 °C
5 ​°F
Max. Operating Temperature Admissible (continuous)
90 °C
194 °F
Coefficient of friction (pulley side / steel driving pulley) ​
0.15
-
​Coefficient of friction (pulley side / driving pulley with friction cover) ​
0.35
-
Coefficient of friction (pulley side / pickled steel slider bed)
0.20
-
Coefficient of friction (pulley side / phenolic resin slider bed)
0.15
-
Coefficient of friction (pulley side / stainless steel slider bed)
0.15
-
Seamless manufacturing width
4000 mm
157.48 inch
Position of the neutral phase (above the running side)
1.30 mm
 0.051 inch
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties

Joining Method 

Flexproof 10x80
Pulley diameter (minimum)
mm/inch
60/2.36
​Pulley diameter minimum with counter flection
mm/inch
100/3.94
​Admissible tensile force per unit of width

Admissible tensile force per unit of width at max. operating temperature​
N/mm
​lbf/in
30
171

26
148
Slider bed suitable
-
Yes
Carrying rollers suitable
-
Yes
​Troughed installation suitable
-
No
​Powerturns / curved installations
-
No
Knife-edge (nosebar) suitable
-
No
​Metal detector suitable
-
No
Low Noise applications
-
No

Chemical Resistance

Link to 'Chemical Resistance Information': https://rims.habasit.com

Mode of Use or Conveyance 

Horizontal

Calculations 

For most applications calculation is not required. Should you still need a calculation: please ask Habasit.​

Recommendation

Follow the Installing and Maintenance Instructions which are supplied with each product delivery, Install the slack belt and tension until running perfectly under the full belt load, Maximum initial elongation: 0.8%!, Recommended initial elongation 0.3 - 0.5%

For details consult 'Printing Blanket Handling and Maintenance Instructions' available in the Habasit download center or contact Habasit. "https://www.habasit.com/en/Download-center"

Store printing blankets in their original packaging protected from sunlight/light in a cool and dry place. Storage of printing blankets shall not exceed 1 year at above condition.

​This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment, Use cleaning agent as prescribed by the machine or cleaning agent manufacturer​