O-1 Habasit Machine Tapes

Main Industry Segments

Cardboard Converting, Paper Manufacturing and Processing, Paper Printing and Finishing

Applications

Machine Tape, Paper Handling Belt, Processing Belt

Special Features 

Abrasion Resistant, Constant and Gentle Positive Grip, Constant Coefficient of Friction, Forgiving in case of Short Term Shock Overloads, Non-Marking, Oil Resistant

Product Construction / Design

Conveying Side Material 
Polyamide (PA)
Conveying Side Surface 
Nonwoven (fleece) Structure
Conveying Side Property
Non-Adhesive
Conveying Side Color
Light Gray
Traction Layer (Material)
Polyamide (PA)
Number of Fabrics
1
Pulley Side Material
Acrylonitrile-Butadiene-Rubber (NBR)
Pulley Side Surface
Coarse Textile Structure
Pulley Side Property
Adhesive
​Pulley Side Color
Green

Product Characteristics 

Antistatically Equipped
Yes
Adhesive Free Joining Method
No
Food Suitablilty, EU Conformance
No
Food Suitablilty, FDA Conformance
​No

Technical Data 

Thickness of Belt 
2.9 mm
0.11 Inch
Mass of Belt (belt weight)
1.8 kg/m
0.369 lb/sqft
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155)
8.0 N/mm
46 lbf/in
Tensile Force for 1% Elongation after Relaxation (k1% relaxed) per Unit of Width (Habasit Standard SOP3-155 / EN ISO 21181)
3.4 N/mm
19 lbf/in
Min. Operating Temperature Admissible (continuous)
-20 C
-4 F
Max. Operating Temperature Admissible (continuous)
100 C
212 F
Seamless Manufacturing Width
1200 mm
47.24 Inch
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties

Joining Method 

Thermofix 75
link to Chemical resistance information: https://rims.habasit.com
Pulley Diameter (minimum)
mm/inch
40/1.57
Pulley Diameter Minimum with Counter Flection
mm/inch
40/1.57
Slider Bed Suitable
Yes
Carrying Rollers Suitable
Yes
Troughed Installation Suitable
No

Chemical Resistance

Link to 'Chemical Resistance Information 

Mode of Use or Conveyance 

Declined, Horizontal, Inclined, Vertical

Calculations 

For most applications calculation is not required. Should you still need a calculation: please ask MIB.

Recommendation

Do not go below initial elongation (epsilon) - 0.3%, Install the slack belt and tension until running perfectly under the full belt load.

Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.