NSL-11ESBV 13 Habasit Conveyor Belt

Main industry segments

Airport, Distribution centers

Applications

Acceleration belt, Decline belt, Incline belt, Induction belt, Infeed belt, Inserting belt, Sorting belt

Special features

Antistatic, Flame retardant, High coefficient of friction surface, Low noise applications suitable 

Product Construction / Design

Conveying Side Material 
Polyvinylchloride (PVC)
Conveying Side Surface 
Longitudinal groove structure
Conveying Side Property
Super-adhesive
Conveying Side Color
Black
Traction Layer (Material)
Polyester (PET)
Number of Fabrics
2
Pulley Side Material
Polyester (PET)
Pulley Side Surface
Fabric
Pulley Side Property
Non-adhesive
Pulley Side Color
Off-white

Product Characteristics 

Antistatically equipped
Yes
Adhesive free joining method​
Yes
Flammability
In accordance with ISO 340
Food Suitablilty, FDA Conformance
No
Food Suitability, USDA Conformance
No use intended
Food Suitability, EU Conformance
No
Other conformance
-

Technical Data 

Thickness of Belt 
3.3 mm
0.12 inch
Mass of Belt (belt weight)
3.3 kg/m²
0.676 lb/sqft
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155)
11 N/mm
63 lb/sqft
Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181)
7.0 N/mm
40 lbf/in
Min. Operating Temperature Admissible (continuous)
-30 °C
-22 ​°F
Max. Operating Temperature Admissible (continuous)
70 °C
158 °F
Coefficient of friction (pulley side / steel driving pulley) ​
0.15
-
​Coefficient of friction (pulley side / driving pulley with friction cover) ​
0.35
-
Coefficient of friction (pulley side / pickled steel slider bed)
0.25
-
Coefficient of friction (pulley side / phenolic resin slider bed)
0.20
-
Coefficient of friction (pulley side / stainless steel slider bed)
0.15
-
Seamless manufacturing width
3000 mm
118.11 inch
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties

Joining Method 

Flexproof 10x80
Pulley diameter (minimum)
mm/inch
40/1.57
​Pulley diameter minimum with counter flection
mm/inch
40/1.57
​Admissible tensile force per unit of width

Admissible tensile force per unit of width at max. operating temperature​
N/mm
​lbf/in
14
80
​
8.5
49
Slider bed suitable
-
Yes
Carrying rollers suitable
-
Yes
​Troughed installation suitable
-
No
​Powerturns / curved installations
-
No
Knife-edge (nosebar) suitable
-
No
​Metal detector suitable
-
No
Low Noise applications
-
Yes

Chemical Resistance

Link to 'Chemical Resistance Information': https://rims.habasit.com

REACH

This product contains more than 0.1% of the following substance(s) of very high concern (SVHC) and is (are) included in the Candidate List. Further information is available from your Habasit representation.

Substance(s); Triphenyl phosphate (TPP)

Mode of Use or Conveyance 

Accumulation, Diverting, Horizontal

Calculations 

For most applications calculation is not required. Should you still need a calculation: please ask Habasit.​

Recommendation

 Do not go below initial elongation (epsilon) ~ 0.3%

Store spare belts in a cool and dry place and if possible in their original packaging. Protect spare belts from sunlight/UV-radiation/dust/dirt! Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"

​This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment