NAB-10ESBV 13 Habasit Conveyor Belt

Main industry segments

 Airport, Distribution centers

Applications

 Acceleration belt, Check-in belt, Decline belt, Incline belt, Sorting belt

Special features

 Antistatic, Flame retardant, Low noise applications suitable, Super grip surface

Product Construction / Design

Conveying Side Material 
Polyvinylchloride (PVC)
Conveying Side Surface 
Jink wave (sine wave) structure
Conveying Side Property
Super-adhesive
Conveying Side Color
Black
Traction Layer (Material)
Polyester (PET)
Number of Fabrics
2
Pulley Side Material
Polyester (PET)
Pulley Side Surface
Fabric
Pulley Side Property
Non-adhesive
Pulley Side Color
Gray

Product Characteristics 

Antistatically equipped
Yes
Adhesive free joining method​
Yes
Flammability
In accordance with ISO 340
Food Suitablilty, FDA Conformance
No
Food Suitability, USDA Conformance
No use intended
Food Suitability, EU Conformance
No
Other conformance
-

Technical Data 

Thickness of Belt 
5.3 mm
0.21 inch
Mass of Belt (belt weight)
4.7 kg/m²
0.963 lb/sqft
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155)
9.0 N/mm
51 lb/sqft
Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181)
6.0 N/mm
34 lbf/in
Min. Operating Temperature Admissible (continuous)
0 °C
32 ​°F
Max. Operating Temperature Admissible (continuous)
70 °C
158 °F
Coefficient of friction (pulley side / steel driving pulley) ​
0.15
-
​Coefficient of friction (pulley side / driving pulley with friction cover) ​
0.35
-
Coefficient of friction (pulley side / pickled steel slider bed)
0.25
-
Coefficient of friction (pulley side / phenolic resin slider bed)
0.20
-
Coefficient of friction (pulley side / stainless steel slider bed)
0.15
-
Seamless manufacturing width
3000 mm
118.11 inch
Hardness belt cover (See Recommendation)
50 ShA
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties

Joining Method 

Flexproof 10x80
Pulley diameter (minimum)
mm/inch
40/1.57
​Pulley diameter minimum with counter flection
mm/inch
60/2.36
​Admissible tensile force per unit of width

Admissible tensile force per unit of width at max. operating temperature​
N/mm
​lbf/in
15
86

9.5
​54
Slider bed suitable
-
Yes
Carrying rollers suitable
-
Yes
​Troughed installation suitable
-
No
​Powerturns / curved installations
-
No
Knife-edge (nosebar) suitable
-
No
​Metal detector suitable
-
Yes
Low Noise applications
-
Yes

Chemical Resistance

Link to 'Chemical Resistance Information': https://rims.habasit.com

REACH

 This product contains more than 0.1% of the following substance(s) of very high concern (SVHC) and is (are) included in the Candidate List. Further information is available from your Habasit representation.

​Substance(s); Triphenyl phosphate (TPP)

Mode of Use or Conveyance 

Horizontal, Inclined

Calculations 

For most applications calculation is not required. Should you still need a calculation: please ask Habasit.​

Recommendation

 Do not go below initial elongation (epsilon) ~ 0.3%

​Store spare belts in a cool and dry place and if possible in their original packaging. Protect spare belts from sunlight/UV-radiation/dust/dirt! Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf" This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment, Shore Hardness not measured according to ISO7619-1. This value is taken directly on the belt cover without any consideration of top layer thickness