NAB-5EVCV 11 Habasit Conveyor Belt
Main Industry Segments
Farming and harvesting, Fruit, Primary food packaging, Vegetables
Applications
Side skirt, Wave profile
Special Features
Reverse side coated
|
|
Product Construction / Design
Conveying Side Material |
Polyvinylchloride (PVC) |
Conveying Side Surface |
Super matt finish |
Conveying Side Property |
Medium-adhesive |
Conveying Side Color |
Cobalt blue |
Traction Layer (Material) |
Polyester (PET) |
Number of Fabrics |
1 |
Pulley Side Material |
Polyvinylchloride (PVC) |
Pulley Side Surface |
Matt |
Pulley Side Property |
Medium-adhesive |
Pulley Side Color |
Cobalt blue |
Product Characteristics
Antistatically equipped |
Yes |
Adhesive free joining method |
Yes |
Flammability |
No specific flammability prevention property |
Food Suitablilty, FDA Conformance |
Yes - Check Document of Compliance (DoC) in our Portal |
Food Suitability, USDA Conformance |
No use intended |
Food Suitability, EU Conformance |
Yes - Check Document of Compliance (DoC) in our Portal |
Other conformance |
- |
Technical Data
Thickness of Belt |
2.6 mm |
0.10 inch |
Mass of Belt (belt weight) |
3.1 kg/m² |
0.635 lb/sqft |
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155) |
7.0 N/mm |
40 lb/sqft |
Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181) |
4.6 N/mm |
26 lbf/in |
Min. Operating Temperature Admissible (continuous) |
-10 °C |
14 °F |
Max. Operating Temperature Admissible (continuous) |
70 °C |
158 °F |
Coefficient of friction (pulley side / steel driving pulley) |
0.60 |
- |
Coefficient of friction (pulley side / driving pulley with friction cover) |
0.40 |
- |
Coefficient of friction (pulley side / pickled steel slider bed) |
500 mm |
19.69 |
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Joining Method
|
Flexproof 10x80 |
Pulley diameter (minimum) |
mm/inch |
40/1.57 |
Pulley diameter minimum with counter flection |
mm/inch |
40/1.57 |
Admissible tensile force per unit of width Admissible tensile force per unit of width at max. operating temperature |
N/mm lbf/in |
11 63 9.0 51 |
Slider bed suitable |
- |
No |
Carrying rollers suitable |
- |
Yes |
Troughed installation suitable |
- |
Yes |
Powerturns / curved installations |
- |
No |
Knife-edge (nosebar) suitable |
- |
No |
Metal detector suitable |
- |
Yes |
Low Noise applications |
- |
No |
Chemical Resistance
Link to 'Chemical Resistance Information': https://rims.habasit.com
Calculations
For most applications calculation is not required. Should you still need a calculation: please ask Habasit.
Recommendation
Do not go below initial elongation (epsilon) ~ 0.3%
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging. Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf" This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging. Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf" This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment