MVT-5E Machine Tapes
Main Industry Segments
Paper Manufacturing and Processing, Paper Printing and Finishing
Applications
Machine Tape, Paper Handling Belt, Processing Belt
Special Features
Abrasion Resistant, Adhesive-Free Joint, Constant and Gentle Positive Grip, Dimensionally Stable, Non-Marking, Versatile
Product Construction / Design
Conveying Side Material |
Acrylonitrile-Butadiene-Rubber (NBR) |
Conveying Side Surface |
Coarse Textile Structure |
Conveying Side Property |
Adhesive |
Conveying Side Color |
Green |
Traction Layer (Material) |
Polyester (PET) Fabric |
Number of Fabrics |
2 |
Pulley Side Material |
Polyester (PET) Fabric |
Pulley Side Surface |
Impreganted Fabric |
Pulley Side Property |
Non-Adhesive |
Pulley Side Color |
Off-White |
Product Characteristics
Antistatically Equipped |
Yes |
Adhesive Free Joining Method |
Yes |
Food Suitablilty, EU Conformance |
No |
Food Suitablilty, FDA Conformance |
No |
Technical Data
Thickness of Belt |
1.30 mm |
0.05 Inch |
Mass of Belt (belt weight) |
1.6 kg/m |
0.328 lb/sqft |
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155) |
6.0 N/mm |
34 lbf/in |
Tensile Force for 1% Elongation after Relaxation (k1% relaxed) per Unit of Width (Habasit Standard SOP3-155 / EN ISO 21181) |
4.4 N/mm |
25 lbf/in |
Min. Operating Temperature Admissible (continuous) |
-20 C |
-4 F |
Max. Operating Temperature Admissible (continuous) |
60 C |
140 F |
Seamless Manufacturing Width |
1200 mm |
47.24 Inch |
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Joining Method |
Flexproof 8 x 30 |
link to Chemical resistance information: https://rims.habasit.com
Pulley Diameter (minimum) |
mm/inch |
20/0.79 |
Pulley Diameter Minimum with Counter Flection |
mm/inch |
20/0.79 |
Slider Bed Suitable |
Yes |
|
Carrying Rollers Suitable |
Yes |
|
Troughed Installation Suitable |
No |
Chemical Resistance
Link to 'Chemical Resistance Information
Mode of Use or Conveyance
Declined, Horizontal, Inclined
Calculations
For most applications calculation is not required. Should you still need a calculation: please ask MIB.
Recommendation
Do not go below initial elongation (epsilon) - 0.3%, Install the slack belt and tension until running perfectly under the full belt load.
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.