MNI-10E Habasit Machine Tapes

Main Industry Segments

Paper Manufacturing and Processing, Paper Printing and Finishing

Applications

Folder Belt, Machine Tape, Paper Handling Belt 

Special Features 

 Adhesive-free joint, Constant and gentle positive grip, Dimensionally stable, High abrasion resistance, Non-marking, Suitable for twin belt conveyor

Product Construction / Design

Conveying Side Material 
Polyamide (PA) Fabric
Conveying Side Surface 
Fine Structure
Conveying Side Property
Non-Adhesive
Conveying Side Color
Black
Traction Layer (Material)
Polyester (PET) Fabric
Number of Fabrics
2
Pulley Side Material
Polyester (PET) Fabric
Pulley Side Surface
Rough structure
Pulley Side Property
Non-Adhesive
​Pulley Side Color
Black

Product Characteristics 

Antistatically Equipped
Yes
Adhesive Free Joining Method
Yes
Food Suitablilty, EU Conformance
No
Food Suitablilty, FDA Conformance
​No

Technical Data 

Thickness of Belt 
1.8 mm
0.07 Inch
Mass of Belt (belt weight)
2.0 kg/m
0.410 lb/sqft
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155)
13 N/mm
74 lbf/in
Tensile Force for 1% Elongation after Relaxation (k1% relaxed) per Unit of Width (Habasit Standard SOP3-155 / EN ISO 21181)
9.0 N/mm
51 lbf/in
Min. Operating Temperature Admissible (continuous)
-20 C
-4 F
Max. Operating Temperature Admissible (continuous)
60 C
140 F
Seamless Manufacturing Width
1140 mm
44.88 Inch
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties

Joining Method 

Flexproof 8 x 30
link to Chemical resistance information: https://rims.habasit.com
Pulley Diameter (minimum)
mm/inch
30/1.18
Pulley Diameter Minimum with Counter Flection
mm/inch
30/1.18
Slider Bed Suitable
Yes
Carrying Rollers Suitable
Yes
Troughed Installation Suitable
No

Chemical Resistance

Link to 'Chemical Resistance Information 

Mode of Use or Conveyance 

Declined, Horizontal, Inclined, Vertical

Calculations 

For most applications calculation is not required. Should you still need a calculation: please ask MIB.

Recommendation

Do not go below initial elongation (epsilon) ~ 0.3%, Install the slack belt and tension until running perfectly under the full belt load

​Store spare belts in a cool and dry place and if possible in their original packaging. Protect spare belts from sunlight/UV-radiation/dust/dirt! Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"