MAV-5E Machine Tapes
Main Industry Segments
Paper Manufacturing and Processing, Paper Printing and Finishing
Applications
Machine Tape, Paper Handling Belt
Special Features
Abrasion Resistant, Adhesive-Free Joint, Dimensionally Stable, Fibre Fly Accumulation Prevention
|
Product Construction / Design
Conveying Side Material |
Hamid |
Conveying Side Surface |
Smooth |
Conveying Side Property |
Non-Adhesive |
Conveying Side Color |
Black |
Traction Layer (Material) |
Polyamide (PA) |
Number of Fabrics |
1 |
Pulley Side Material |
Hamid |
Pulley Side Surface |
Smooth |
Pulley Side Property |
Non-Adhesive |
Pulley Side Color |
Black |
Product Characteristics
Antistatically Equipped |
Yes |
Adhesive Free Joining Method |
Yes |
Food Suitablilty, EU Conformance |
No |
Food Suitablilty, FDA Conformance |
No |
Technical Data
Thickness of Belt |
1.00 mm |
0.04 Inch |
Mass of Belt (belt weight) |
1.0 kg/m |
0.205 lb/sqft |
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155) |
4.6 N/mm |
26 lbf/in |
Tensile Force for 1% Elongation after Relaxation (k1% relaxed) per Unit of Width (Habasit Standard SOP3-155 / EN ISO 21181) |
2.2 N/mm |
13 lbf/in |
Min. Operating Temperature Admissible (continuous) |
-20 C |
-4 F |
Max. Operating Temperature Admissible (continuous) |
60 C |
140 F |
Seamless Manufacturing Width |
1200 mm |
47.24 Inch |
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Joining Method |
Flexproof 8 x 30 |
link to Chemical resistance information: https://rims.habasit.com
Pulley Diameter (minimum) |
mm/inch |
20/0.79 |
Pulley Diameter Minimum with Counter Flection |
mm/inch |
20/0.79 |
Slider Bed Suitable |
Yes |
|
Carrying Rollers Suitable |
Yes |
|
Troughed Installation Suitable |
No |
Chemical Resistance
Link to 'Chemical Resistance Information
Mode of Use or Conveyance
Horizontal, Vertical
Calculations
For most applications calculation is not required. Should you still need a calculation: please ask MIB.
Recommendation
Install the slack belt and tension until running perfectly under the full belt load.
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.