Construction:
​Compound Top Cover
​Thickness (in)
Top Cover Description
Top Cover Shore
Compound Bottom Cover
Bottom Cover Thickness (in)
Bottom Cover Description
Bottom Cover Shore
Number of Piles
Anti Static
Overall Gauge (in)
Unit Weight- lb/PIW
Material Between Piles
Maximum Width (in)
Temperature Range (°F)- High
Temperature Range (°F)- Low

Green PVC
(3.70 mm) 0.1456 in.
Roughtop
35
Polyester
(0.00 mm) 0.0000 in.
Quiet Weave
N/A
2
Yes
(5.30 mm) 0.2086 in.
0.0750 lbs/PIW
PVC
118 in.
140 °F
-4 °F

MIB-116J

2 Ply Poly CR57 Petrol Green PVC Jink RT x QW
international designation: E10/2 0/V37 Green Jink RT x QW NA
This belt features a soft 35 Shore A green PVC wavy rough top cover, making it ideal for incline/decline applications. It is commonly used in distribution centers for sorting, indexing and case taper belts. The wavy design of the PVC top cover helps reduce noise on snub rollers and eliminates vibration or jumping effects from small diameter snub rollers. This belt is perfect for applications where small pulleys are required, such as bottling/filling, packaging, plastics, printing & paper, cellulose, logistics, manufacturing and pharmaceuticals.
Pulley Diameter, Minimum
Normal Flex
Back Flex

(59.94 mm) 2.3600 in.
(99.82 mm) 3.9300 in.
Belt Strength:Pull for 1% Elongation
​
Splice Instructions:
Foil
Splice Process
Press Temperature (°F)
Press Pressure (psi)

​Note: Listed above is a guideline only. Every vulcanizer is different and will show different results. We recommend that you do a test splice with your press before attempting the actual belt splice.


​Other:
Cross Rigid
Impression Top
Oil Resistant
Fire Resistant
FDA Approved
(10 N/mm) 57 lbs/sq. in.
​

Yes
Finger
330 °F
25 lbs/sq. in.










Yes
Yes
No 
Yes 
​No

​


​