MAT-02 H MACHINE TAPES
Main Industry Segments
Letter Sorting, Paper Manufacturing and Processing, Paper Printing and Finishing
Applications
Machine Tape, Paper Handling Belt
Special Features
Abrasion Resistant, Adhesive-free joint, Constant and Gentle Positive Grip, Dimensionally Stable, Elastic, Outstanding Flex-Fatigue
Product Construction / Design
Conveying Side Material |
Acrylonitrile-Butadiene-Rubber (NBR) |
Conveying Side Surface |
Rough Structure |
Conveying Side Property |
Adhesive |
Conveying Side Color |
Green |
Traction Layer (material) |
Hamid |
Number of Fabrics |
0 |
Pulley Side Material |
Acrylonitrile-Butadiene-Rubber (NBR) |
Pulley Side Surface |
Rough Structure |
Pulley Side Property |
Adhesive |
Pulley Side Color |
Black |
Product Characteristics
Antistatically Equipped |
Yes |
Adhesive Free Joining Method |
Yes |
Food Suitablilty, EU Conformance |
No |
Food Suitablilty, FDA Conformance |
No |
Technical Data
Thickness of Belt |
1.40 mm |
0.06 Inch |
Mass of Belt (belt weight) |
1.4 kg/m |
0.287 lb/sqft |
Tensile Force for 1% Elongation (k1% after running in) per Unit of Width (Habasit Standard SOP3-013) |
0.90 N/mm |
5 lbf/in |
Tensile Force for 1% elongation (k1% static) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181) |
0.60 N/mm |
3 lbf/in |
Min. Operating Temperature Admissible (continuous) |
-20 C |
-4 F |
Max. Operating Temperature Admissible (continuous) |
60 C |
140 F |
Seamless Manufacturing Width |
1200 mm |
47.24 Inch |
All data are approximate values under standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Joining Method |
Flexproof 8 x 30 |
link to Chemical resistance information: https://rims.habasit.com
Pulley Diameter (minimum) |
mm/inch |
15/0.59 |
Pulley Diameter Minimum with Counter Flection |
mm/inch |
15/0.59 |
Slider Bed Suitable |
Value |
No |
Carrying Rollers Suitable |
Yes |
|
Troughed Installation Suitable |
No |
Chemical Resistance
Link to 'Chemical Resistance Information
Mode of Use or Conveyance
Declined, Horizontal, Inclined, Twists, Twists with Short Center Distance, Vertical
Calculations
For most applications calculation is not required. Should you still need a calculation: please ask MIB
Recommendation
Elastic Belt: Initial elongation depends on belt load and application, Initial elongation between 3 to 8% is recommended.
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.