MAM-8P Machine Tapes
Main Industry Segments
Paper Manufacturing and Processing, Paper Printing and Finishing
Applications
Folder Belt, Machine Tape, Paper Handling Belt
Special Features
Abrasion Resistant, Adhesive-free Joint, Constant and Gentle Positive Grip, Dimensionally Stable, Non-Marking
|
|
Product Construction / Design
Conveying Side Material |
Acrylonitrile-Butadiene-Rubber (NBR) |
Conveying Side Surface |
Fine Structure |
Conveying Side Property |
Adhesive |
Conveying Side Color |
Green |
Traction Layer (material) |
Polyamide (PA) Fabric / Hamid Foil |
Number of Fabrics |
1 |
Pulley Side Material |
Hamid |
Pulley Side Surface |
Smooth |
Pulley Side Property |
Non-Adhesive |
Pulley Side Color |
Black |
Product Characteristics
Antistatically Equipped |
Yes |
Adhesive Free Joining Method |
Yes |
Food Suitablilty, EU Conformance |
No |
Food Suitablilty, FDA Conformance |
No |
Technical Data
Thickness of Belt |
1.8 mm |
0.07 Inch |
Mass of Belt (belt weight) |
2.0 kg/m |
0.410 lb/sqft |
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-013) |
6.5 N/mm |
37 lbf/in |
Tensile Force for 1% elongation after Relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181) |
3.4 N/mm |
19 lbf/in |
Min. Operating Temperature Admissible (continuous) |
-20 C |
-4 F |
Max. Operating Temperature Admissible (continuous) |
60 C |
140 F |
Seamless Manufacturing Width |
1200 mm |
47.24 Inch |
All data are approximate values under standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Joining Method |
Flexproof 8 x 30 |
link to Chemical resistance information: https://rims.habasit.com
Pulley Diameter (minimum) |
mm/inch |
25/0.98 |
Pulley Diameter Minimum with Counter Flection |
mm/inch |
40/1.57 |
Slider Bed Suitable |
Value |
Yes |
Carrying Rollers Suitable |
Yes |
|
Troughed Installation Suitable |
No |
Chemical Resistance
Link to 'Chemical Resistance Information
Mode of Use or Conveyance
Declined, Horizontal, Inclined, Twists, Twists with Short Center Distance, Vertical
Calculations
For most applications calculation is not required. Should you still need a calculation: please ask MIB
Recommendation
Do not go below initial elongation (epsilon) - 0.3%, Install the slack belt tension until running perfectly under the full belt load.
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.
Keep belts edges free of any installation/machine contact, This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation of EU directive 2014/34/EU) and therefore is subject to user's analysis in the respective environment.
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.
Keep belts edges free of any installation/machine contact, This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation of EU directive 2014/34/EU) and therefore is subject to user's analysis in the respective environment.