MAM-04HE Machine Tapes
Main Industry Segments
Letter Sorting
Applications
Letter Transport Belt, Machine Tape, Mail Handling / Mail Sorting Belt, Paper Handling Belt
Special Features
Abrasion Resistant, Easy Release, Constant and Gentle Positive Grip, Dimensionally Stable, Elastic, Static Conductive
Product Construction / Design
Conveying Side Material |
Acrylonitrile-Butadiene-Rubber (NBR) |
Conveying Side Surface |
Rough Structure |
Conveying Side Property |
Adhesive |
Conveying Side Color |
Black |
Traction Layer (Material) |
Hamid |
Number of Fabrics |
0 |
Pulley Side Material |
Acrylonitrile-Butadiene-Rubber (NBR) |
Pulley Side Surface |
Rough Structure |
Pulley Side Property |
Adhesive |
Pulley Side Color |
Black |
Product Characteristics
Antistatically Equipped |
Yes |
Adhesive Free Joining Method |
Yes |
Food Suitablilty, EU Conformance |
No |
Food Suitablilty, FDA Conformance |
No |
Technical Data
Thickness of Belt |
1.5 mm |
0.06 Inch |
Mass of Belt (belt weight) |
1.5 kg/m |
0.297 lb/sqft |
Tensile Force for 8% Elongation (k8% Static) per Unit of Width (Habasit Standard SOP3-155 / EN ISO 21181): |
2.6 N/mm |
15 lbf/in |
Tensile Force for 8% Elongation after Relaxation (k8% relaxed) per Unit of Width (Habasit Standard SOP3-155 / EN ISO 21181): |
1.8 N/mm |
10 lbf/in |
Min. Operating Temperature Admissible (continuous) |
-20 C |
-4 F |
Max. Operating Temperature Admissible (continuous) |
60 C |
140 F |
Seamless Manufacturing Width |
1140 mm |
44.88 Inch |
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Joining Method |
Flexproof 8 x 30 |
link to Chemical resistance information: https://rims.habasit.com
Pulley Diameter (minimum) |
mm/inch |
15/0.59 |
Pulley Diameter Minimum with Counter Flection |
mm/inch |
15/0.59 |
Slider Bed Suitable |
Yes (only small belt load) |
|
Carrying Rollers Suitable |
Yes |
|
Troughed Installation Suitable |
Yes |
Chemical Resistance
Link to 'Chemical Resistance Information
Mode of Use or Conveyance
Declined, Horizontal, Inclined, Twists, Twists with Short Center Distance, Vertical
Calculations
For most applications calculation is not required. Should you still need a calculation: please ask MIB.
Recommendation
Elastic belt: Initial elongation depends on belt load and application, Initial elongation between 3 to 8% is recommended
Store spare belts in a cool and dry place and if possible in their original packaging. Protect spare belts from sunlight/UV-radiation/dust/dirt! Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"
Keep belt edges free of any installation/machine contact, This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment
Store spare belts in a cool and dry place and if possible in their original packaging. Protect spare belts from sunlight/UV-radiation/dust/dirt! Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"
Keep belt edges free of any installation/machine contact, This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment