MAM-04H MACHINE TAPES

Main Industry Segments

Letter Sorting, Paper Manufacturing and Processing, Paper Printing and Finishing, Secondary Packaging

Applications

Feeder Belt, Machine Tape, Mail Handling / Mail Sorting Belt, Paper Handling Belt

Special Features 

Abrasion Resistant, Adhesive-free joint, Constant and Gentle Positive Grip, Dimensionally Stable, Elastic, Versatile Outstanding Flex-Fatigue

Product Construction / Design

Conveying Side Material 
Acrylonitrile-Butadiene-Rubber (NBR)
Conveying Side Surface 
Fine Structure 
Conveying Side Property
Adhesive
Conveying Side Color
Green
Traction Layer (material)
Hamid
Number of Fabrics ​ 
0
Pulley Side Material
Acrylonitrile-Butadiene-Rubber (NBR)
Pulley Side Surface
Rough Structure
Pulley Side Property
Adhesive
Pulley Side Color
Black

Product Characteristics 

Antistatically Equipped
Yes
Adhesive Free Joining Method
Yes
Food Suitablilty, EU Conformance
No
Food Suitablilty, FDA Conformance
​No

Technical Data 

Thickness of Belt 
1.45 mm
0.06 Inch
Mass of Belt (belt weight)
1.4 kg/m
0.287 lb/sqft
Tensile Force for 1% Elongation (k8% static) per Unit of Width (Habasit Standard SOP3-155 / EN ISO 21181)
2.6 N/mm
15 lbf/in
Tensile Force for 8% elongation after relaxation (k8% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181)
1.8 N/mm
10 lbf/in
Min. Operating Temperature Admissible (continuous)
-20 C
-4 F
Max. Operating Temperature Admissible (continuous)
60 C
140 F
Seamless Manufacturing Width
1140 mm
44.88 Inch
All data are approximate values under standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties

Joining Method 

Flexproof 8 x 30
link to Chemical resistance information: https://rims.habasit.com
Pulley Diameter (minimum)
mm/inch
15/0.59
Pulley Diameter Minimum with Counter Flection
mm/inch
15/0.59
Slider Bed Suitable 
Value
Yes (only small belt load)
Carrying Rollers Suitable 
Yes
Troughed Installation Suitable
Yes

Chemical Resistance

Link to 'Chemical Resistance Information 

Mode of Use or Conveyance 

Declined, Horizontal, Inclined, Twists, Twists with Short Center Distance, Vertical

Calculations 

For most applications calculation is not required. Should you still need a calculation: please ask MIB

Recommendation

Elastic belt: Initial elongation depends on belt load and application, Initial elongation between 3 to 8% is recommended

​Store spare belts in a cool and dry place and if possible in their original packaging. Protect spare belts from sunlight/UV-radiation/dust/dirt! Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"