MAB-02 Machine Tapes
Main Industry Segments
Distribution Centers, Letter Sorting, Paper Printing and Finishing
Applications
Decline Belt, Diverting Belt, Incline Belt, Machine Tape, Packing Belt, Sorting Belt, Weighing Belt
Special Features
Abrasion Resistant, Adhesive-Free Joint, Constant and Gentle Positive Grip, Edges Wear Resistant, Elastic, Small Pulley Diameter Suitable, Outstanding Flex-Fatigue
Product Construction / Design
Conveying Side Material |
Thermoplastic Polyurethane (TPU) |
Conveying Side Surface |
Fine Textile Structure |
Conveying Side Property |
Medium-Adhesive |
Conveying Side Color |
Green |
Traction Layer (Material) |
Thermoplastic Polyurethane (TPU) |
Number of Fabrics |
0 |
Pulley Side Material |
Polyurethane Cross-Linked (PUR) |
Pulley Side Surface |
Fine Textile Structure |
Pulley Side Property |
Non-Adhesive |
Pulley Side Color |
Black |
Product Characteristics
Antistatically Equipped |
Yes |
Adhesive Free Joining Method |
Yes |
Food Suitablilty, EU Conformance |
No |
Food Suitablilty, FDA Conformance |
No |
Technical Data
Thickness of Belt |
1.20 mm |
0.05 Inch |
Mass of Belt (belt weight) |
1.3 kg/m |
0.266 lb/sqft |
Tensile Force for 8% Elongation (k8% Static) per Unit of Width (Habasit Standard SOP3-155 / EN ISO 21181) |
1.4 N/mm |
8 lbf/in |
Tensile Force for 8% Elongation (k8% Static) per Unit of Width (Habasit Standard SOP3-155 / EN ISO 21181): |
1.0 N/mm |
6 lbf/in |
Min. Operating Temperature Admissible (continuous) |
-30 C |
-22 F |
Max. Operating Temperature Admissible (continuous) |
60 C |
140 F |
Seamless Manufacturing Width |
1440 mm |
59.69 Inch |
Used as a monolithic conveyer belt: Admissible elongation = 4 % ; Tensile force for 1% elongation (k1% static) per unit of width (Habasit standard SOP3-155) = xy N/mm; Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181) = yz N/mm; (see all the explanation in the section "Recommendation"
Joining Related Properties
Joining Method |
Flexproof 8 x 30 |
link to Chemical resistance information: https://rims.habasit.com
Pulley Diameter (minimum) |
mm/inch |
15/0.59 |
Pulley Diameter Minimum with Counter Flection |
mm/inch |
15/0.59 |
Slider Bed Suitable |
Yes (only small belt load) |
|
Carrying Rollers Suitable |
Yes |
|
Troughed Installation Suitable |
Yes |
Chemical Resistance
Link to 'Chemical Resistance Information
Mode of Use or Conveyance
Declined, Horizontal, Inclined
Calculations
For most applications calculation is not required. Should you still need a calculation: please ask MIB.
Recommendation
Elastic Belt: Initial elongation depends on belt load and application, Elastic tapes can be used in a wide variety of applications. Their requirements and test standards change accordingly. If elastic machine tapes are used as monolithic conveyer belts, the admissible elongation is reduced and k1% relaxed must be determined accordingly. See the corresponding values for this product in the remarks below the technical data. In the typical machine tape application in the Printing and Paper and Letter sorting industry the initial elongation is usually between 4% and 8%.
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.
This product has not been tested according ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user's analysis in the respective environment.
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.
This product has not been tested according ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user's analysis in the respective environment.