HSW-5EB Habasit Conveyor Belt
Main Industry Segments
Distribution centers
Applications
Induction belt, Powerturn belt, Sorting belt
Special Features
Abrasion resistant, Antistatic, Bi-directional suitable, Excellent tracking, Flexibility in all directions, High coefficient of friction surface, Longitudinal flexibility, Powerturn suitable
|
|
Product Construction / Design
Conveying Side Material |
Thermoplastic polyurethane (TPU) |
Conveying Side Surface |
Waffle structure |
Conveying Side Property |
Super-adhesive |
Conveying Side Color |
Black |
Traction Layer (Material) |
Polyester (PET) |
Number of Fabrics |
2 |
Pulley Side Material |
Polyester (PET) |
Pulley Side Surface |
Fabric |
Pulley Side Property |
Non-adhesive |
Pulley Side Color |
Gray |
Product Characteristics
Antistatically equipped |
Yes |
Adhesive free joining method |
Yes |
Flammability |
Tested according to UL 94HB (USA) requirement; HB= Horizontal Burning |
Food Suitablilty, FDA Conformance |
No |
Food Suitability, USDA Conformance |
No use intended |
Food Suitability, EU Conformance |
No |
Other conformance/approval |
Japanese Food Regulation (MHLW Notification No. 370) |
Technical Data
Thickness of Belt |
1.7 mm |
0.07 inch |
Mass of Belt (belt weight) |
1.7 kg/m² |
0.348 lb/sqft |
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155) |
6.5 N/mm |
37 lbf/in |
Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181) |
4.2 N/mm |
24 lbf/in |
Min. Operating Temperature Admissible (continuous) |
-30 °C |
-22 °F |
Max. Operating Temperature Admissible (continuous) |
80 °C |
176 °F |
Coefficient of friction (pulley side / steel driving pulley) |
0.15 |
- |
Coefficient of friction (pulley side / driving pulley with friction cover) |
0.35 |
- |
Coefficient of friction (pulley side / pickled steel slider bed) |
0.20 |
- |
Coefficient of friction (pulley side / phenolic resin slider bed) |
0.15 |
- |
Coefficient of friction (pulley side / stainless steel slider bed) |
0.15 |
- |
Seamless manufacturing width |
2400 mm |
94.49 inch |
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Joining Method
|
Flexproof 10x80 |
Knife-edge (nosebar) radius (minimum) |
mm/inch |
4/0.157 |
Pulley diameter (minimum) |
mm/inch |
15/0.59 |
Pulley diameter minimum with counter flection |
mm/inch |
25/0.98 |
Admissible tensile force per unit of width |
N/mm lbf/in |
10 57 |
Admissible tensile force per unit of width at max. operating temperature |
N/mm lbf/in |
4.6 26 |
Slider bed suitable |
- |
Yes |
Carrying rollers suitable |
- |
Yes |
Troughed installation suitable |
- |
Yes |
Powerturns / curved installations |
- |
Yes |
Low Noise applications |
- |
No |
Metal detector suitable |
- |
No |
Chemical Resistance
Link to 'Chemical Resistance Information': https://rims.habasit.com
Mode of Use or Conveyance
Curved, Horizontal, Inclined
Calculations
For most applications calculation is not required. Should you still need a calculation: please ask Habasit.
Recommendation
Do not go below initial elongation (epsilon) ~ 0.3%, Install the slack belt and tension until running perfectly under the full belt load Store spare belts in a cool and dry place and if possible in their original packaging. Protect spare belts from sunlight/UV-radiation/dust/dirt! Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf" This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment