HNI-5PE Machine Tapes

Main Industry Segments

Paper Manufacturing and Processing, Paper Printing and Finishing

Applications

Folder Belt, Machine Tape, Paper Handling Belt, Processing Belt

Special Features 

Easy Release, Constant and Gentle Positive Grip, High Abrasion Resistance, Non-Marking

Product Construction / Design

Conveying Side Material 
Polyamide (PA)
Conveying Side Surface 
Fabric
Conveying Side Property
Non-Adhesive
Conveying Side Color
Green
Traction Layer (material)
Polyamide (PA)
Number of Fabrics ​ 
3
Pulley Side Material
Polyurethane cross-linked (PUR)
Pulley Side Surface
Impregnated Fabric
Pulley Side Property
Non-Adhesive
Pulley Side Color
Black

Product Characteristics 

Antistatically Equipped
Yes
Adhesive Free Joining Method
No
Food Suitablilty, EU Conformance
No
Food Suitablilty, FDA Conformance
​No

Technical Data 

Thickness of Belt 
0.90 mm
0.04 Inch
Mass of Belt (belt weight)
0.75 kg/m
0.154 lb/sqft
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-013)
3.4 N/mm
19 lbf/in
Tensile Force for 1% elongation after Relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181)
1.6 N/mm
9 lbf/in
Min. Operating Temperature Admissible (continuous)
-30 C
-22 F
Max. Operating Temperature Admissible (continuous)
100 C
212 F
Seamless Manufacturing Width
1140 mm
44.88 Inch
All data are approximate values under standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties

Joining Method 

Thermofix ​75°
link to Chemical resistance information: https://rims.habasit.com
Pulley Diameter (minimum)
mm/inch
15/0.59
Pulley Diameter Minimum with Counter Flection
mm/inch
15/0.59
Slider Bed Suitable 
Value
Yes
Carrying Rollers Suitable 
No

Chemical Resistance

Link to 'Chemical Resistance Information 

Mode of Use or Conveyance 

Horizontal, Inclined, Vertical

Calculations 

For most applications calculation is not required. Should you still need a calculation: please ask Michigan Industrial Belting or Habasit

Recommendation

Do not go below initial elongation (epsilon) ~ 0.5%, Install the slack belt and tension until running perfectly under the full belt load
Store spare belts in a cool and dry place and if possible in their original packaging. Protect spare belts from
sunlight/UV-radiation/dust/dirt! Check Link for Storage requirements:
"https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"
This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment