HAT-12P Habasit Conveyor Belt
Main Industry Segments
Cardboard converting, Paper manufacturing and processing, Paper printing and finishing, Secondary packaging
Applications
Machine tape, Paper handling belt, Processing belt
Special Features
Abrasion resistant, Adhesive-free joint, Constant coefficient of friction, Versatile, Outstanding flex-fatigue
Product Construction / Design
Conveying Side Material |
Acrylonitrile-Butadiene-Rubber (NBR) |
Conveying Side Surface |
Coarse textile structure |
Conveying Side Property |
Adhesive |
Conveying Side Color |
Green |
Traction Layer (Material) |
Polyester (PET) |
Number of Fabrics |
2 |
Pulley Side Material |
Polyester (PET) |
Pulley Side Surface |
Impregnated fabric |
Pulley Side Property |
Non-adhesive |
Pulley Side Color |
Gray |
Product Characteristics
Antistatically equipped |
Yes |
Adhesive free joining method |
Yes |
Flammability |
No specific flammability prevention property |
Food Suitablilty, FDA Conformance |
No |
Food Suitability, USDA Conformance |
No use intended |
Food Suitability, EU Conformance |
No |
Other conformance/approval |
- |
Technical Data
Thickness of Belt |
1.5 mm |
0.06 inch |
Mass of Belt (belt weight) |
1.8 kg/m² |
0.369 lb/sqft |
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155) |
6.5 N/mm |
37 lb/sqft |
Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181) |
4.8 N/mm |
27 lbf/in |
Min. Operating Temperature Admissible (continuous) |
0 °C |
32 °F |
Max. Operating Temperature Admissible (continuous) |
80 °C |
176 °F |
Coefficient of friction (pulley side / steel driving pulley) |
0.15 |
- |
Coefficient of friction (pulley side / driving pulley with friction cover) |
0.35 |
- |
Coefficient of friction (pulley side / pickled steel slider bed) |
0.20 |
- |
Coefficient of friction (pulley side / phenolic resin slider bed) |
0.15 |
- |
Coefficient of friction (pulley side / stainless steel slider bed) |
0.15 |
- |
Seamless manufacturing width |
1140 mm |
44.88 inch |
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Pulley diameter (minimum) |
mm/inch |
25/0.98 |
Pulley diameter minimum with counter flection |
mm/inch |
25/0.98 |
Admissible tensile force per unit of width Admissible tensile force per unit of width at max. operating temperature |
N/mm lbf/in |
12 69 5.5 31 |
Slider bed suitable |
- |
Yes |
Carrying rollers suitable |
- |
Yes |
Troughed installation suitable |
- |
No |
Powerturns / curved installations |
- |
No |
Knife-edge (nosebar) suitable |
- |
No |
Metal detector suitable |
- |
No |
Low Noise applications |
- |
No |
Chemical Resistance
Link to 'Chemical Resistance Information': https://rims.habasit.com
Mode of Use or Conveyance
Declined, Horizontal, Inclined, Vertical
Calculations
For most applications calculation is not required. Should you still need a calculation: please ask Habasit.
Recommendation
Do not go below initial elongation (epsilon) ~ 0.3%, Install the slack belt and tension until running perfectly under the full belt load Store spare belts in a cool and dry place and if possible in their original packaging. Protect spare belts from sunlight/UV-radiation/dust/dirt! Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"
This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment
This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment