H-4EMDT Habasit Conveyor Belt

Main Industry Segments

Distribution centers, General conveying, Non-wovens, Paper printing and finishing

Applications

Miniconveyor belt, Transfer belt, Weighing belt

 Special features

Abrasion resistant, Antistatic, Dimensionally stable, Flat laying, Longitudinal flexibility, Small pulley diameter suitable

Product Construction / Design

Conveying Side Material 
Thermoplastic polyurethane (TPU)
Conveying Side Surface 
Smooth
Conveying Side Property
Meedium-adhesive
Conveying Side Color
Dark green
Traction Layer (Material)
Polyester (PET)
Number of Fabrics
1
Pulley Side Material
Polyester (PET)
Pulley Side Surface
Impregnated Fabric
Pulley Side Property
Non-adhesive
Pulley Side Color
Gray

Product Characteristics 

Antistatically equipped
Yes
Adhesive free joining method​
Yes
Flammability
Tested according to UL 94HB (USA) requirement; HB= Horizontal Burning
Food Suitablilty, FDA Conformance
 Yes - Check Document of Compliance (DoC) in our Portal
Food Suitability, USDA Conformance
No use intended
Food Suitability, EU Conformance
 Yes - Check Document of Compliance (DoC) in our Portal
Other conformance/approval
 Japanese Food Regulation (MHLW Notification No. 370)

Technical Data 

Thickness of Belt 
0.90 mm
0.04 inch
Mass of Belt (belt weight)
1.0 kg/m²
0.205 lb/sqft
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155)
4.6 N/mm
26 lbf/in
Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181)
3.2 N/mm
18 lbf/in
Min. Operating Temperature Admissible (continuous)
-30 °C
-22 °F
Max. Operating Temperature Admissible (continuous)
80 °C
176 °F
Coefficient of friction (pulley side / steel driving pulley) ​​
0.15
-
Coefficient of friction (pulley side / driving pulley with friction cover) ​
0.35
-
Coefficient of friction (pulley side / pickled steel slider bed)
0.20
-
Coefficient of friction (pulley side / phenolic resin slider bed)
0.15
-
Coefficient of friction (pulley side / stainless steel slider bed)
0.15
-
Seamless manufacturing width
2400 mm
94.49 inch
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties

Joining Method 

Flexproof 10 x 80
Knife-edge (nosebar) radius (minimum)
mm/inch
4/0.157
​Pulley diameter (minimum)​
mm/inch
15/0.59
Pulley diameter minimum with counter flection
mm/inch
15/0.59
​Admissible tensile force per unit of width
​
N/mm
​lbf/in
8.0
46
Admissible tensile force per unit of width at max. operating temperature​
N/mm
​lbf/in
4.4
25
Slider bed suitable
-
Yes
Carrying rollers suitable
-
Yes
​Troughed installation suitable
-
No
​Powerturns / curved installations
-
No
​Metal detector suitable
-
No

Chemical Resistance

Link to 'Chemical Resistance Information': https://rims.habasit.com

Mode of Use or Conveyance 

Horizontal

Calculations 

For most applications calculation is not required. Should you still need a calculation: please ask Habasit.​

Recommendation

Do not go below initial elongation (epsilon) ~ 0.3%, Install the slack belt and tension until running perfectly under the full belt load

​Store spare belts in a cool and dry place and if possible in their original packaging. Protect spare belts from sunlight/UV-radiation/dust/dirt! Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"

This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment