FT-18/30E Habasit Folder-Gluer Belts

Main Industry Segments

 Cardboard converting, Paper manufacturing and processing, Primary packaging, Secondary packaging

Applications

 Folder-gluer belt

Special Features 

 Adhesive-free joint, Constant coefficient of friction, Dimensionally stable, Longitudinal flexibility

Product Construction / Design

Conveying Side Material 
Thermoplastic Alloy
Conveying Side Surface 
Rough structure
Conveying Side Property
Adhesive
Conveying Side Color
Light gray
Traction Layer (Material)
Polyester (PET)
Number of Fabrics
1
Pulley Side Material
Thermoplastic Alloy
Pulley Side Surface
Rough structure
Pulley Side Property
Adhesive
​Pulley Side Color
Light gray

Product Characteristics 

Antistatically equipped
Yes
Adhesive Free Joining Method
Yes
Food Suitablilty, FDA Conformance
 Yes - Check Document of Compliance (DoC) in Habasit Portal
Food Suitablilty, EU Conformance
 Yes - Check Document of Compliance (DoC) in Habasit Portal

Technical Data 

Thickness of Belt 
3.0 mm
0.12 Inch
Mass of Belt (belt weight)
3.2 kg/m
0.655 lb/sqft
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155)
18 N/mm
103 lbf/in
Min. Operating Temperature Admissible (continuous)
0 °C
32 °F
Max. Operating Temperature Admissible (continuous)
60 °C
140 °F
Seamless Manufacturing Width
1100 mm
43.31 inch
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties

Joining Method 

 Flexproof 10 x 120
link to Chemical resistance information: https://rims.habasit.com
Pulley Diameter (minimum)
mm/inch
30/1.18
Pulley Diameter Minimum with Counter Flection
mm/inch
30/1.18
Slider bed suitable
-
No
Carrying Rollers Suitable
-
Yes

Chemical Resistance

Link to 'Chemical Resistance Information 

Mode of Use or Conveyance 

Declined, Horizontal, Inclined, Twists with short center distance, Vertical

Recommendation

Do not go below initial elongation (epsilon) ~ 0.3%, Install the slack belt and tension until running perfectly under the full belt load

Store spare belts in a cool and dry place and if possible in their original packaging. Protect spare belts from sunlight/UV-radiation/dust/dirt! Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"

​This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment