FR-10/40 Habasit Folder-Gluer Belts

Main Industry Segments

 Cardboard converting, Paper manufacturing and processing

Applications

 Folder-gluer belt, Processing belt

Special Features 

 Abrasion resistant, Constant coefficient of friction, Forgiving in case of short term shock like overloads, Robustness

Product Construction / Design

Conveying Side Material 
Acrylonitrile-Butadiene-Rubber (NBR)
Conveying Side Surface 
Rough structure
Conveying Side Property
Adhesive
Conveying Side Color
Light green
Traction Layer (Material)
Polyamide (PA)
Number of Fabrics
2
Pulley Side Material
 Acrylonitrile-Butadiene-Rubber (NBR)
Pulley Side Surface
Rough structure
Pulley Side Property
Adhesive
​Pulley Side Color
Yellow

Product Characteristics 

Antistatically equipped
Yes
Adhesive Free Joining Method
No
Food Suitablilty, FDA Conformance
No
Food Suitablilty, EU Conformance
No

Technical Data 

Thickness of Belt 
4.0 mm
0.16 Inch
Mass of Belt (belt weight)
4.5 kg/m
0.922 lb/sqft
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155)
5.0 N/mm
29 lbf/in
Min. Operating Temperature Admissible (continuous)
0 °C
32 °F
Max. Operating Temperature Admissible (continuous)
100 °C
212 °F
Seamless Manufacturing Width
1140 mm
44.88 Inch
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties

Joining Method 

Thermofix 75°
link to Chemical resistance information: https://rims.habasit.com
Pulley Diameter (minimum)
mm/inch
40/1.57
Pulley Diameter Minimum with Counter Flection
mm/inch
40/1.57
Slider bed suitable
-
No
Carrying Rollers Suitable
-
Yes

Chemical Resistance

Link to 'Chemical Resistance Information 

Mode of Use or Conveyance 

Declined, Horizontal, Inclined, Troughed, Twists, Twists with short center distance, Vertical

Recommendation

 Do not go below initial elongation (epsilon) ~ 0.5%, Install the slack belt and tension until running perfectly under the full belt load

Store spare belts in a cool and dry place and if possible in their original packaging. Protect spare belts from sunlight/UV-radiation/dust/dirt! Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"
​
dmin >=40mm in case belt speed > 300m/min, Keep belt edges free of any installation/machine contact, This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment