FNB-12E Habasit Conveyor Belt

Main Industry Segments

Chemical industry, Distribution centers, Industrial automation, Primary food packaging

Applications

Food processing/conveying belt, Packaging belt, Transfer belt

Special Features 

Easy release, Low friction running side, No stick-slip effect

Product Construction / Design

Conveying Side Material 
Polyester (PET)
Conveying Side Surface 
Impregnated fabric
Conveying Side Property
Non-adhesive
Conveying Side Color
Off-white
Traction Layer (Material)
Polyester (PET)
Number of Fabrics
2
Pulley Side Material
Polyester (PET)
Pulley Side Surface
Impregnated fabric
Pulley Side Property
Non-adhesive
Pulley Side Color
Off-white

Product Characteristics 

Antistatically equipped
Yes
Adhesive free joining method​
Yes
Flammability
No specific flammability prevention property
Food Suitablilty, FDA Conformance
 Yes - Check Document of Compliance (DoC) in our Portal
Food Suitability, USDA Conformance
No use intended
Food Suitability, EU Conformance
 Yes - Check Document of Compliance (DoC) in our Portal
Other conformance/approval
Japanese Food Regulation (MHLW Notification No. 370)
Halal certified

Technical Data 

Thickness of Belt 
1.6 mm
0.06 inch
Mass of Belt (belt weight)
1.7 kg/m²
0.338 lb/sqft
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155)
18 N/mm
103 lb/sqft
Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181)
12 N/mm
69 lbf/in
Min. Operating Temperature Admissible (continuous)
-30 °C
-22 ​°F
Max. Operating Temperature Admissible (continuous)
80 °C
176 °F
Coefficient of friction (pulley side / steel driving pulley) ​
0.15
-
​Coefficient of friction (pulley side / driving pulley with friction cover) ​
0.35
-
Coefficient of friction (pulley side / pickled steel slider bed)
0.20
-
Coefficient of friction (pulley side / phenolic resin slider bed)
0.25
-
Coefficient of friction (pulley side / stainless steel slider bed)
0.15
-
Seamless manufacturing width
4000 mm
157.48 inch
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties

Joining Method 

Flexproof 10 x 80
Pulley diameter (minimum)
mm/inch
50/1.97
​Pulley diameter minimum with counter flection
mm/inch
50/1.97
​Admissible tensile force per unit of width

Admissible tensile force per unit of width at max. operating temperature​
N/mm
​lbf/in
16
91
​
7.0
40
Slider bed suitable
-
Yes
Carrying rollers suitable
-
Yes
​Troughed installation suitable
-
No
​Powerturns / curved installations
-
No
Knife-edge (nosebar) suitable
-
No
​Metal detector suitable
-
No
Low Noise applications
-
No

Chemical Resistance

Link to 'Chemical Resistance Information': https://rims.habasit.com

Mode of Use or Conveyance 

Accumulation, Horizontal

Calculations 

For most applications calculation is not required. Should you still need a calculation: please ask Habasit.​

Recommendation

Do not go below initial elongation (epsilon) ~ 0.3%, Install the slack belt and tension until running perfectly under the full belt load

Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging. Check Link for Storage requirements:
"https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"

This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment