FNB-6EVWQ+H15 Habasit Conveyor Belt
Main Industry Segments
mary food packaging, Ready meals
Applications
Infeed belt, Packaging belt, Transfer belt
Special Features
Antimicrobially equipped, Frayless edges
Product Construction / Design
Conveying Side Material |
Thermoplastic polyurethane (TPU) |
Conveying Side Surface |
Matt |
Conveying Side Property |
Non-adhesive |
Conveying Side Color |
White |
Traction Layer (Material) |
Polyester (PET) |
Number of Fabrics |
2 |
Pulley Side Material |
Thermoplastic polyurethane (TPU) |
Pulley Side Surface |
Quadrillé (quadrangular) structure |
Pulley Side Property |
Medium-adhesive |
Pulley Side Color |
White |
Product Characteristics
Antistatically equipped |
Yes |
Adhesive free joining method |
Yes |
Flammability |
No specific flammability prevention property |
Food Suitablilty, FDA Conformance |
Yes - Check Document of Compliance (DoC) in our Portal |
Food Suitability, USDA Conformance |
USDA certified for compliance with USDA Dairy Equipment Guidelines and NSF/ANSI/3-A 14159-3 standard for Meat and Poultry Processing. Certification is valid only if belt edges are sealed or belt cords are not exposed and when optional belt accessories like cleats, v-guides and scoops comply with the applicable FDA regulations for the conveyed product. Contact your Habasit representative for detailed information. |
Food Suitability, EU Conformance |
No |
Other conformance/approval |
Halal certified |
Technical Data
Thickness of Belt |
1.6 mm |
0.06 inch |
Mass of Belt (belt weight) |
1.8 kg/m² |
0.369 lb/sqft |
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155) |
8.0 N/mm |
46 lb/sqft |
Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181) |
5.5 N/mm |
31 lbf/in |
Min. Operating Temperature Admissible (continuous) |
-15 °C |
5 °F |
Max. Operating Temperature Admissible (continuous) |
80 °C |
176 °F |
Coefficient of friction (pulley side / steel driving pulley) |
0.30 |
- |
Coefficient of friction (pulley side / driving pulley with friction cover) |
0.40 |
- |
Coefficient of friction (pulley side / pickled steel slider bed) |
0.60 |
- |
Coefficient of friction (pulley side / phenolic resin slider bed) |
0.50 |
- |
Coefficient of friction (pulley side / stainless steel slider bed) |
0.35 |
- |
Seamless manufacturing width |
2400 mm |
94.49 inch |
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Pulley diameter (minimum) |
mm/inch |
30/1.18 |
Pulley diameter minimum with counter flection |
mm/inch |
50/1.97 |
Admissible tensile force per unit of width Admissible tensile force per unit of width at max. operating temperature |
N/mm lbf/in |
13 74 8.5 49 |
Slider bed suitable |
- |
Yes |
Carrying rollers suitable |
- |
Yes |
Troughed installation suitable |
- |
No |
Powerturns / curved installations |
- |
No |
Knife-edge (nosebar) suitable |
- |
No |
Metal detector suitable |
- |
Yes |
Chemical Resistance
Link to 'Chemical Resistance Information': https://rims.habasit.com
Mode of Use or Conveyance
Horizontal
Calculations
For most applications calculation is not required. Should you still need a calculation: please ask Habasit.
Recommendation
Do not go below initial elongation (epsilon) ~ 0.3%, Install the slack belt and tension until running perfectly under
the full belt load
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in
their original packaging. Check Link for Storage requirements:
"https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"
HabaGUARD/HyGUARD belts are restricted for direct food contact applications to use at or below room
temperature, HabaGUARD is designed to meet the national regulations of the USA. Compliance with regulations in
other countries has to be ensured by the user, This product does not protect users or others against food borne or
disease-causing bacteria. Proper cleaning procedures must always be adhered to, This product has not been tested
according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and
therefore is subject to user’s analysis in the respective environment
the full belt load
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in
their original packaging. Check Link for Storage requirements:
"https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"
HabaGUARD/HyGUARD belts are restricted for direct food contact applications to use at or below room
temperature, HabaGUARD is designed to meet the national regulations of the USA. Compliance with regulations in
other countries has to be ensured by the user, This product does not protect users or others against food borne or
disease-causing bacteria. Proper cleaning procedures must always be adhered to, This product has not been tested
according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and
therefore is subject to user’s analysis in the respective environment