FNB-6EVCW+H14 Habasit Conveyor Belt

Main Industry Segments

Baked snacks, Biscuit and Crackers, Bread, Convenience food, Dairy (incl. cheese), Frozen food, Pasta, Pastry, Pet
food, Pizza, Poultry, Ready meals, Red meat

Applications

Food processing/conveying belt

Special Features 

Abrasion resistant, Easy release, Frayless edges, Oil and fat resistant, Reverse side coated

Product Construction / Design

Conveying Side Material 
Thermoplastic polyurethane (TPU)
Conveying Side Surface 
Matt
Conveying Side Property
Non-adhesive
Conveying Side Color
Cobalt blue
Traction Layer (Material)
Polyester (PET)
Number of Fabrics
2
Pulley Side Material
Thermoplastic polyurethane (TPU)
Pulley Side Surface
Inverted pyramid structure
Pulley Side Property
Non-adhesive
Pulley Side Color
Cobalt blue

Product Characteristics 

Antistatically equipped
No
Adhesive free joining method​
Yes
Flammability
No specific flammability prevention property
Food Suitablilty, FDA Conformance
 Yes - Check Document of Compliance (DoC) in our Portal
Food Suitability, USDA Conformance
No use intended
Food Suitability, EU Conformance
 Yes - Check Document of Compliance (DoC) in our Portal
Other conformance/approval
-

Technical Data 

Thickness of Belt 
2.0 mm
0.08 inch
Mass of Belt (belt weight)
2.2 kg/m²
0.451 lb/sqft
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155)
7.0 N/mm
40 lb/sqft
Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181)
4.8 N/mm
27 lbf/in
Min. Operating Temperature Admissible (continuous)
-20 °C
-4 ​°F
Max. Operating Temperature Admissible (continuous)
100 °C
212 °F
Coefficient of friction (pulley side / steel driving pulley) ​
0.35
-
​Coefficient of friction (pulley side / driving pulley with friction cover) ​
0.40
-
Coefficient of friction (pulley side / pickled steel slider bed)
0.50
-
Coefficient of friction (pulley side / phenolic resin slider bed)
0.30
-
Coefficient of friction (pulley side / stainless steel slider bed)
0.60
-
Seamless manufacturing width
2000 mm
78.74 inch
On request other seamless manufacturing width
1500 mm
59 inch
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties

Joining Method 

Flexproof 20 x 80
Pulley diameter (minimum)
mm/inch
20/0.79
​Pulley diameter minimum with counter flection
mm/inch
30/1.18
Slider bed suitable
-
Yes
Carrying rollers suitable
-
Yes
​Troughed installation suitable
-
No
​Powerturns / curved installations
-
No
Knife-edge (nosebar) suitable
-
No
Low Noise applications
-
No
​Metal detector suitable
-
Yes

Chemical Resistance

Link to 'Chemical Resistance Information': https://rims.habasit.com

Mode of Use or Conveyance 

Accumulation, Horizontal

Calculations 

For most applications calculation is not required. Should you still need a calculation: please ask Habasit.​

Recommendation

Do not go below initial elongation (epsilon) ~ 0.3%, Install the slack belt and tension until running perfectly under
the full belt load
​
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in
their original packaging. Check Link for Storage requirements:
"https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"

Not suitable for wet operations combined with increased temperatures and with extreme greasy and oily
conditions, This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX
95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment,
Use cleaning agent as prescribed by the machine or cleaning agent manufacturer