FAS-8EICT-U1 Habasit Conveyor Belt

Main Industry Segments

 Dairy (incl. cheese), Fish, Frozen food, Poultry, Red meat

Applications

 Decline belt, Delivery belt, Food processing/conveying belt, Incline belt

Special Features 

 Abrasion resistant, High grip surface, Hydrolysis resistant, Suitable for UV-C disinfection

Product Construction / Design

Conveying Side Material 
 Thermoplastic polyurethane (TPU)
Conveying Side Surface 
Sawtooth profile structure
Conveying Side Property
Adhesive
Conveying Side Color
Cobalt blue
Traction Layer (Material)
Polyester (PET)
Number of Fabrics
2
Pulley Side Material
Polyester (PET)
Pulley Side Surface
Impregnated fabric
Pulley Side Property
Non-adhesive
Pulley Side Color
Cobalt blue

Product Characteristics 

Antistatically equipped
Yes
Adhesive free joining method​
Yes
Flammability
No specific flammability prevention property
Food Suitablilty, FDA Conformance
 Yes - Check Document of Compliance (DoC) in our Portal
Food Suitability, USDA Conformance
No use intended
Food Suitability, EU Conformance
 Yes - Check Document of Compliance (DoC) in our Portal
Other conformance/approval
-

Technical Data 

Thickness of Belt 
2.2 mm
0.09 inch
Mass of Belt (belt weight)
2.1 kg/m²
0.430 lb/sqft
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155)
10 N/mm
57 lb/sqft
Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181)
6.5 N/mm
37 lbf/in
Min. Operating Temperature Admissible (continuous)
-30  °C
-22 ​°F
Max. Operating Temperature Admissible (continuous)
100 °C
212 °F
Coefficient of friction (pulley side / steel driving pulley) ​
0.15
-
​Coefficient of friction (pulley side / driving pulley with friction cover) ​
0.35
-
Coefficient of friction (pulley side / pickled steel slider bed)
0.20
-
Coefficient of friction (pulley side / phenolic resin slider bed)
0.20
-
Coefficient of friction (pulley side / stainless steel slider bed)
0.20
-
Seamless manufacturing width
2000 mm
78.74 inch
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties

Joining Method 

Flexproof 10 x 80
Pulley diameter (minimum)
mm/inch
25/0.98
​Pulley diameter minimum with counter flection
mm/inch
50/1.97
​Admissible tensile force per unit of width

Admissible tensile force per unit of width at max. operating temperature​
N/mm
​lbf/in
16
91
​
10
​57
Slider bed suitable
-
Yes
Carrying rollers suitable
-
Yes
​Troughed installation suitable
-
No
​Powerturns / curved installations
-
No
Knife-edge (nosebar) suitable
-
No
​Metal detector suitable
-
No
Low Noise applications
-
Yes

Chemical Resistance

Link to 'Chemical Resistance Information': https://rims.habasit.com

Mode of Use or Conveyance 

Declined, Horizontal, Inclined

Calculations 

For most applications calculation is not required. Should you still need a calculation: please ask Habasit.​

Recommendation

 Do not go below initial elongation (epsilon) ~ 0.3%, Install the slack belt and tension until running perfectly under the full belt load Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging. Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"

​If High Frequency (HF) system is used check belt heating, Not suitable for wet operations combined with increased temperatures and with extreme greasy and oily conditions, This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment