FAQ-5EIC Habasit Conveyor Belt

Main Industry Segments

Baked snacks, Biscuit and Crackers, Bread, Frozen food, Pastry

Applications

 Delivery belt, Food processing/conveying belt, Weighing belt

Product Construction / Design

Conveying Side Material 
Thermoplastic polyurethane (TPU)
Conveying Side Surface 
 Quadrillé (quadrangular) structure
Conveying Side Property
Adhesive
Conveying Side Color
Cobalt blue
Traction Layer (Material)
Polyester (PET)
Number of Fabrics
2
Pulley Side Material
Polyester (PET)
Pulley Side Surface
Impregnated Fabric
Pulley Side Property
Non-adhesive
Pulley Side Color
Light gray

Product Characteristics 

Antistatically equipped
Yes
Adhesive free joining method​
Yes
Flammability
No specific flammability prevention property​
Food Suitablilty, FDA Conformance
 Yes - Check Document of Compliance (DoC) in our Portal
Food Suitability, USDA Conformance
No use intended
Food Suitability, EU Conformance
 Yes - Check Document of Compliance (DoC) in our Portal
Other conformance/approval
Halal certified

Technical Data 

Thickness of Belt 
1.40 mm
0.06 inch
Mass of Belt (belt weight)
1.4 kg/m²
0.287 lb/sqft
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155)
6.5 N/mm
37 lbf/in
Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181)
4.8 N/mm
27 lbf/in
Min. Operating Temperature Admissible (continuous)
-10 °C
14 °F
Max. Operating Temperature Admissible (continuous)
80 °C
176 °F
Coefficient of friction (pulley side / steel driving pulley) ​​
0.15
-
Coefficient of friction (pulley side / driving pulley with friction cover) ​
0.35
-
Coefficient of friction (pulley side / pickled steel slider bed)
0.20
-
Coefficient of friction (pulley side / phenolic resin slider bed)
0.25
-
Coefficient of friction (pulley side / stainless steel slider bed)
0.15
-
Seamless manufacturing width
2400 mm
94.49 inch
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties

Joining Method 

Flexproof 10 x 80
Knife-edge (nosebar) radius (minimum)
mm/inch
4/0.157
​Pulley diameter (minimum)​
mm/inch
15/0.59
Pulley diameter minimum with counter flection
mm/inch
20/0.79
​Admissible tensile force per unit of width
​
N/mm
​lbf/in
12
69
Admissible tensile force per unit of width at max. operating temperature​
N/mm
​lbf/in
7.0
40
Slider bed suitable
-
Yes
Carrying rollers suitable
-
Yes
​Troughed installation suitable
-
No
​Powerturns / curved installations
-
No
Low Noise applications
-
No
​Metal detector suitable
-
No

Chemical Resistance

Link to 'Chemical Resistance Information': https://rims.habasit.com

Mode of Use or Conveyance 

Declined, Horizontal, Inclined

Calculations 

For most applications calculation is not required. Should you still need a calculation: please ask Habasit.​

Recommendation

Do not go below initial elongation (epsilon) ~ 0.3%, Install the slack belt and tension until running perfectly under the full belt load Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging. Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"

​If High Frequency (HF) system is used check belt heating, Not suitable for wet operations combined with increased temperatures and with extreme greasy and oily conditions, This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment