FAB-10EVCW Habasit Conveyor Belt
Main Industry Segments
Biscuit and Crackers, Bread, Fish, Pastry, Pizza, Poultry, Red meat
Applications
Food processing/conveying belt
Special Features
Reverse side coated
|
|
Product Construction / Design
Conveying Side Material |
Polyvinylchloride (PVC) |
Conveying Side Surface |
Matt |
Conveying Side Property |
Medium-adhesive |
Conveying Side Color |
Cobalt blue |
Traction Layer (Material) |
Polyester (PET) |
Number of Fabrics |
2 |
Pulley Side Material |
Polyvinylchloride (PVC) |
Pulley Side Surface |
Inverted pyramid structure |
Pulley Side Property |
Medium-adhesive |
Pulley Side Color |
Cobalt blue |
Product Characteristics
Antistatically equipped |
No |
Adhesive free joining method |
Yes |
Flammability |
No specific flammability prevention property |
Food Suitablilty, FDA Conformance |
Yes - Check Document of Compliance (DoC) in our Portal |
Food Suitability, USDA Conformance |
USDA certified for compliance with NSF/ANSI/3-A 14159-3 standard for Meat and Poultry Processing. Certification is valid only if belt edges are sealed or belt cords are not exposed and when optional belt accessories like cleats, v-guides and scoops comply with the applicable FDA regulations for the conveyed product. Contact your Habasit representative for detailed information |
Food Suitability, EU Conformance |
Yes - Check Document of Compliance (DoC) in our Portal |
Other conformance/approval |
Halal certified |
Technical Data
Thickness of Belt |
3.0 mm |
0.12 inch |
Mass of Belt (belt weight) |
3.40 kg/m² |
0.696 lb/sqft |
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155) |
9.0 N/mm |
51 lb/sqft |
Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181) |
6.0 N/mm |
34 lbf/in |
Min. Operating Temperature Admissible (continuous) |
-10 °C |
14 °F |
Max. Operating Temperature Admissible (continuous) |
80 °C |
176 °F |
Coefficient of friction (pulley side / steel driving pulley) |
0.35 |
- |
Coefficient of friction (pulley side / driving pulley with friction cover) |
0.40 |
- |
Seamless manufacturing width |
3000 mm |
118.11 inch |
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Joining Method
|
Flexproof 10 x 80 |
Pulley diameter (minimum) |
mm/inch |
60/2.36 |
Pulley diameter minimum with counter flection |
mm/inch |
80/3.15 |
Admissible tensile force per unit of width Admissible tensile force per unit of width at max. operating temperature |
N/mm lbf/in |
15 86 8.5 49 |
Slider bed suitable |
- |
No |
Carrying rollers suitable |
- |
Yes |
Troughed installation suitable |
- |
No |
Powerturns / curved installations |
- |
No |
Knife-edge (nosebar) suitable |
- |
No |
Metal detector suitable |
- |
Yes |
Low Noise applications |
- |
No |
Chemical Resistance
Link to 'Chemical Resistance Information': https://rims.habasit.com
Mode of Use or Conveyance
Horizontal, Inclined
Calculations
For most applications calculation is not required. Should you still need a calculation: please ask Habasit.
Recommendation
Do not go below initial elongation (epsilon) ~ 0.3%, Install the slack belt and tension until running perfectly under the full belt load Store spare belts in a cool and dry place and if possible in their original packaging. Protect spare belts from sunlight/UV-radiation/dust/dirt! Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf" This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment