ENU-20ELBD Habasit Conveyor Belt
Main Industry Segments
Textile printing
Applications
Printing blanket, Textile digital printing
Special Features
Abrasion resistant, High modulus of elasticity, High precision
|
|
Product Construction / Design
Conveying Side Material |
Thermoplastic polyurethane (TPU) |
Conveying Side Surface |
Smooth |
Conveying Side Property |
Non-adhesive |
Conveying Side Color |
Black |
Traction Layer (Material) |
Aramid fabric |
Number of Fabrics |
3 |
Pulley Side Material |
Polyester (PET) |
Pulley Side Surface |
Impregnated Fabric |
Pulley Side Property |
Non-adhesive |
Pulley Side Color |
Gray |
Product Characteristics
Antistatically equipped |
Yes |
Adhesive free joining method |
Yes |
Flammability |
No specific flammability prevention property |
Food Suitablilty, FDA Conformance |
Yes - Check Document of Compliance (DoC) in our Portal |
Food Suitability, USDA Conformance |
No use intended |
Food Suitability, EU Conformance |
Yes - Check Document of Compliance (DoC) in our Portal |
Other conformance/approval |
- |
Technical Data
Thickness of Belt |
2.3 mm |
0.09 inch |
Position of the neutral phase (above the running side) |
0.90 mm |
0.035 inch |
Mass of Belt (belt weight) |
2.6 kg/m² |
0.533 lb/sqft |
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155) |
42 N/mm |
240 lbf/in |
Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181) |
26 N/mm |
148 lbf/in |
Min. Operating Temperature Admissible (continuous) |
-15 °C |
5 °F |
Max. Operating Temperature Admissible (continuous) |
70 °C |
158 °F |
Coefficient of friction (pulley side / steel driving pulley) |
0.15 |
- |
Coefficient of friction (pulley side / driving pulley with friction cover) |
0.35 |
- |
Coefficient of friction (pulley side / pickled steel slider bed) |
0.20 |
- |
Coefficient of friction (pulley side / phenolic resin slider bed) |
0.15 |
- |
Coefficient of friction (pulley side / stainless steel slider bed) |
0.15 |
- |
Seamless manufacturing width |
4000 mm |
157.48 in |
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Joining Method
|
Flexproof 10 x 80 |
Pulley diameter (minimum) |
mm/inch |
80/3.15 |
Pulley diameter minimum with counter flection |
mm/inch |
80/3.15 |
Admissible tensile force per unit of width Admissible tensile force per unit of width at max. operating temperature |
N/mm lbf/in |
40 228 28 160 |
Slider bed suitable |
- |
Yes |
Carrying rollers suitable |
- |
Yes |
Troughed installation suitable |
- |
No |
Powerturns / curved installations |
- |
No |
Knife-edge (nosebar) suitable |
- |
No |
Metal detector suitable |
- |
No |
Low Noise applications |
- |
No |
Chemical Resistance
Link to 'Chemical Resistance Information': https://rims.habasit.com
Mode of Use or Conveyance
Horizontal
Calculations
For most applications calculation is not required. Should you still need a calculation: please ask Habasit.
Recommendation
Follow the Installing and Maintenance Instructions which are supplied with each product delivery, Install the slack belt and tension until running perfectly under the full belt load, Maximum initial elongation: 0.7%!, Recommended initial elongation 0.3 - 0.5% For details consult 'Printing Blanket Handling and Maintenance Instructions' available in the Habasit download center or contact Habasit. "https://www.habasit.com/en/Download-center" Store printing blankets in their original packaging protected from sunlight/light in a cool and dry place. Storage of printing blankets shall not exceed 1 year at above condition. This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment, Use cleaning agent as prescribed by the machine or cleaning agent manufacturer