CNW-6EBC-A1 Habasit Conveyor Belt
Main Industry Segments
Wood panel and boards
Applications
Food processing/conveying belt, Forming line/spreading belt
Special Features
Hydrolysis resistant, Knife-edge (nosebar) suitable, ATEX compliant
|
|
Product Construction / Design
Conveying Side Material |
Thermoplastic polyurethane (TPU) |
Conveying Side Surface |
Matt |
Conveying Side Property |
Non-Adhesive |
Conveying Side Color |
Cobalt blue |
Traction Layer (Material) |
Polyester (PET) |
Number of Fabrics |
2 |
Pulley Side Material |
Polyester (PET) |
Pulley Side Surface |
Impregnated fabric |
Pulley Side Property |
Non-adhesive |
Pulley Side Color |
White |
Product Characteristics
Antistatically equipped |
Yes |
Adhesive free joining method |
Yes |
Flammability |
No specific flammability prevention property |
Food Suitablilty, FDA Conformance |
Yes - Check Document of Compliance (DoC) in our Portal |
Food Suitability, USDA Conformance |
No use intended |
Food Suitability, EU Conformance |
Yes - Check Document of Compliance (DoC) in our Portal |
Other conformance/approval |
- |
Technical Data
Thickness of Belt |
1.7 mm |
0.07 inch |
Mass of Belt (belt weight) |
1.9 kg/m² |
0.389 lb/sqft |
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155) |
13 N/mm |
74 lbf/in |
Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181) |
8.5 N/mm |
49 lbf/in |
Min. Operating Temperature Admissible (continuous) |
0 °C |
32 °F |
Max. Operating Temperature Admissible (continuous) |
80 °C |
176 F |
Coefficient of friction (pulley side / steel driving pulley) |
0.15 |
- |
Coefficient of friction (pulley side / driving pulley with friction cover) |
0.35 |
- |
Coefficient of friction (pulley side / pickled steel slider bed) |
0.20 |
- |
Coefficient of friction (pulley side / phenolic resin slider bed) |
0.15 |
- |
Coefficient of friction (pulley side / stainless steel slider bed) |
0.15 |
- |
Seamless manufacturing width |
4000 mm |
157.48 in |
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Joining Method
|
Flexproof 10x80 |
Pulley diameter (minimum) |
mm/inch |
15/0.59 |
Pulley diameter minimum with counter flection |
mm/inch |
40/1.57 |
Admissible tensile force per unit of width Admissible tensile force per unit of width at max. operating temperature |
N/mm lbf/in |
21 120 11 63 |
Slider bed suitable |
- |
Yes |
Carrying rollers suitable |
- |
Yes |
Troughed installation suitable |
- |
No |
Powerturns / curved installations |
- |
No |
Knife-edge (nosebar) radius (minimum) |
mm/inch |
7/0.276 |
Metal detector suitable |
- |
Yes |
Chemical Resistance
Link to 'Chemical Resistance Information': https://rims.habasit.com
Mode of Use or Conveyance
Horizontal, Inclined
Calculations
For most applications calculation is not required. Should you still need a calculation: please ask Habasit.
Recommendation
Maximum initial elongation: 0.8%!, Recommended initial elongation 0.3 - 0.5% Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging. Check Link for Storage requirements: "https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf" Habasit declares this product as a component which is intended for incorporation into ATEX-compliant equipment or assemblies (directive 2014/34/EU). This component fulfills the classification: ll 2 GD Ex h IIB 80°C Gc (Qualified for equipment group II; category 2; for groups of agents gas (explosion groups IIA and IIB) and dust; protection achieved by constructional safety; for maximum ambient temperature ≤ +80 °C), High frequency system HF: Check belt heating! If belt heats up sawdust or fibres will stick