CT-18/40EH Habasit Folder-Gluer Belts

Main Industry Segments

 Cardboard converting, Paper manufacturing and processing

Applications

 Folder-gluer belt

Special Features 

 Abrasion resistant, Adhesive-free joint, Constant coefficient of friction, Dimensionally stable, Longitudinal flexibility, Outstanding flex-fatigue

Product Construction / Design

Conveying Side Material 
Acrylonitrile-Butadiene-Rubber (NBR)
Conveying Side Surface 
Rough structure
Conveying Side Property
Adhesive
Conveying Side Color
Gray
Traction Layer (Material)
Polyester (PET)
Number of Fabrics
1
Pulley Side Material
 Acrylonitrile-Butadiene-Rubber (NBR)
Pulley Side Surface
Rough structure
Pulley Side Property
Adhesive
​Pulley Side Color
Gray

Product Characteristics 

Antistatically equipped
Yes
Adhesive Free Joining Method
Yes
Food Suitablilty, FDA Conformance
No
Food Suitablilty, EU Conformance
No

Technical Data 

Thickness of Belt 
4.0 mm
0.16 Inch
Mass of Belt (belt weight)
4.0 kg/m
0.819 lb/sqft
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155)
18 N/mm
103 lbf/in
Min. Operating Temperature Admissible (continuous)
0 °C
32 °F
Max. Operating Temperature Admissible (continuous)
60 °C
140 °F
Seamless Manufacturing Width
1100 mm
43.31 Inch
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties

Joining Method 

Flexproof 10 x 80
link to Chemical resistance information: https://rims.habasit.com
Pulley Diameter (minimum)
mm/inch
40/1.57
Pulley Diameter Minimum with Counter Flection
mm/inch
40/1.57
Carrying Rollers Suitable
-
Yes

Chemical Resistance

Link to 'Chemical Resistance Information 

Mode of Use or Conveyance 

Declined, Horizontal, Inclined, Twists, Twists with short center distance, Vertical

Recommendation

Do not go below initial elongation (epsilon) ~ 0.3%, Install the slack belt and tension until running perfectly under the full belt load

Store spare belts in a cool and dry place and if possible in their original packaging. Protect spare belts from sunlight/UV-radiation/dust/dirt! Check Link for Storage requirements:
"https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"

This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment