CM-4/50F Habasit Folder-Gluer Belts
Main Industry Segments
Cardboard converting, Paper manufacturing and processing
Applications
Folder-gluer belt, Processing belt
Special Features
Abrasion resistant, Adhesive-free joint, Constant coefficient of friction, Dimensionally stable, Forgiving in case of short term shock like overloads
|
|
Product Construction / Design
Conveying Side Material |
Acrylonitrile-Butadiene-Rubber (NBR) |
Conveying Side Surface |
Rough structure |
Conveying Side Property |
Adhesive |
Conveying Side Color |
Light green |
Traction Layer (Material) |
Polyamide (PA) |
Number of Fabrics |
2 |
Pulley Side Material |
Acrylonitrile-Butadiene-Rubber (NBR) |
Pulley Side Surface |
Rough structure |
Pulley Side Property |
Adhesive |
Pulley Side Color |
Yellow |
Product Characteristics
Antistatically equipped |
Yes |
Adhesive Free Joining Method |
Yes |
Food Suitablilty, FDA Conformance |
No |
Food Suitablilty, EU Conformance |
No |
Technical Data
Thickness of Belt |
5.0 mm |
0.20 Inch |
Mass of Belt (belt weight) |
5.7 kg/m |
1.167 lb/sqft |
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155) |
4.0 N/mm |
23 lbf/in |
Min. Operating Temperature Admissible (continuous) |
-20 °C |
-4 °F |
Max. Operating Temperature Admissible (continuous) |
65 °C |
149 °F |
Seamless Manufacturing Width |
1140 mm |
44.88 Inch |
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Joining Method |
Flexproof 10 x 80 |
link to Chemical resistance information: https://rims.habasit.com
Pulley Diameter (minimum) |
mm/inch |
60/2.36 |
Pulley Diameter Minimum with Counter Flection |
mm/inch |
60/2.36 |
Slider Bed Suitable |
- |
No |
Carrying Rollers Suitable |
- |
Yes |
Chemical Resistance
Link to 'Chemical Resistance Information
Mode of Use or Conveyance
Declined, Horizontal, Inclined, Vertical
Recommendation
Do not go below initial elongation (epsilon) ~ 0.5%, Install the slack belt and tension until running perfectly under the full belt load
Store spare belts in a cool and dry place and if possible in their original packaging. Protect spare belts from sunlight/UV-radiation/dust/dirt! Check Link for Storage requirements:
"https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"
Belt speed must not exceed 300m/min, This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment
Store spare belts in a cool and dry place and if possible in their original packaging. Protect spare belts from sunlight/UV-radiation/dust/dirt! Check Link for Storage requirements:
"https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"
Belt speed must not exceed 300m/min, This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user’s analysis in the respective environment