CM-18/30F Power Transmission Belts
Main Industry Segments
Distribution Centers
Applications
Folder-Gluer Belt, Live Roller Drive Belt
Special Features
Robustness, Abrasion Resistant, Adhesive-Free Joint, Constant Coefficient of Friction, Dimensionally Stable, Longitudinal Flexibility
|
|
Product Construction / Design
Pulley Side Material |
Acrylonitrile-Butadiene-Rubber (NBR) |
Pulley Side Surface |
Rough Structure |
Pulley Side Color |
Green |
Traction Layer (Material) |
Polyester (PET) |
Number of Fabrics |
1 |
Opposite Side Material |
Acrylonitrile-Butadiene-Rubber (NBR) |
Opposite Side Surface |
Rough Structure |
Opposite Side Color |
Green |
Product Characteristics
Drive Determination |
Double-Sided Power Transmission |
Antistatically Equipped |
Yes |
Adhesive Free Joining Method |
Yes |
Food Suitablilty, FDA Conformance |
No |
Food Suitability, EU Conformance |
No |
Technical Data
Thickness of Belt |
3.2 mm |
0.13 Inch |
Mass of Belt (belt weight) |
3.2 kg/m |
0.655 lb/sqft |
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155) |
15 N/mm |
86 lbf/in |
Nominal Peripheral Force Per Unit of Width |
35 N/mm |
200 lbf/in |
Min. Operating Temperature Admissible (continuous) |
-20 C |
-4 F |
Max. Operating Temperature Admissible (continuous) |
65 C |
149 F |
Seamless Manufacturing Width |
1140 mm |
44.88 Inch |
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Joining Method
|
Flexproof 10 x 80 |
Pulley Diameter (minimum) |
mm/inch |
70/2.76 |
Pulley Diameter Minimum with Counter Flection |
mm/inch |
70/2.76 |
Chemical Resistance
Link to 'Chemical Resistance Information: https://rims.habasit.com
Mode of Use or Conveyance
Live Roller Drive
Calculations
With power transmission belts a calculation at least of the belt width and initial elongation is highly recommended. For this serves the Habasit SeleCalc calculation program. The easiest way is to have belt drives calculated by Habasit representatives.
Recommendation
Do not go below initial elongation (epsilon) -0.5%, Install the slack belt and tension until running perfectly under the full belt load.
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.
This product has not been tested according to ATEX Standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user's analysis in the respective environment.
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.
This product has not been tested according to ATEX Standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user's analysis in the respective environment.