CAB-6EB Habasit Conveyor Belt
Main Industry Segments
Baked snacks, Biscuit and Crackers, Bread, Chocolate, Convenience food, Pastry
Applications
Cooling (line) belt, Inspection/control belt, Metering/singulation belt, Packaging belt, Powerturn belt, Transfer belt, Weighing belt
Special Features
Easy release, Easy cleanability, Frayless edges, Hydrolysis resistant, Powerturn suitable
|
|
Product Construction / Design
Conveying Side Material |
Thermoplastic polyolefine (TPO) |
Conveying Side Surface |
Glossy |
Conveying Side Property |
Adhesive |
Conveying Side Color |
White |
Traction Layer (Material) |
Polyester (PET) |
Number of Fabrics |
2 |
Pulley Side Material |
Polyester (PET) |
Pulley Side Surface |
Impregnated fabric |
Pulley Side Property |
Non-adhesive |
Pulley Side Color |
White |
Product Characteristics
Antistatically equipped |
Yes |
Adhesive free joining method |
Yes |
Flammability |
No specific flammability prevention property |
Food Suitablilty, FDA Conformance |
Yes - Check Document of Compliance (DoC) in our Portal |
Food Suitability, USDA Conformance |
No use intended |
Food Suitability, EU Conformance |
Yes - Check Document of Compliance (DoC) in our Portal |
Other compliance |
Halal certified |
Technical Data
Thickness of Belt |
1.05 mm |
0.04 inch |
Mass of Belt (belt weight) |
1.1kg/m² |
0.225 lb/sqft |
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155) |
4.6 N/mm |
26 lbf/in |
Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181) |
3.4 N/mm |
19 lbf/in |
Min. Operating Temperature Admissible (continuous) |
-40 °C |
- °F |
Max. Operating Temperature Admissible (continuous) |
70 °C |
158 F |
Coefficient of friction (pulley side / steel driving pulley) |
0.15 |
- |
Coefficient of friction (pulley side / driving pulley with friction cover) |
0.35 |
- |
Coefficient of friction (pulley side / pickled steel slider bed) |
0.20 |
- |
Coefficient of friction (pulley side / phenolic resin slider bed) |
0.15 |
- |
Coefficient of friction (pulley side / stainless steel slider bed) |
0.15 |
- |
Seamless manufacturing width |
2400 mm |
94.49 in |
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Joining Method
|
Flexproof 10x80 |
Knife-edge (nosebar) radius (minimum) |
mm/inch |
2/0.079 |
Pulley diameter (minimum) |
mm/inch |
15/0.59 |
Pulley diameter minimum with counter flection |
mm/inch |
20/0.79 |
Admissible tensile force per unit of width |
N/mm lbf/in |
8.5 49 |
Admissible tensile force per unit of width at max. operating temperature |
N/mm lbf/in |
4.0 23 |
Slider bed suitable |
- |
Yes |
Carrying rollers suitable |
- |
Yes |
Troughed installation suitable |
- |
Yes |
Powerturns / curved installations |
- |
Yes |
Low noise applications |
- |
No |
Metal detector suitable |
- |
Yes |
Chemical Resistance
Link to 'Chemical Resistance Information': https://rims.habasit.com
Mode of Use or Conveyance
Horizontal, Inclined
Calculations
For most applications calculation is not required. Should you still need a calculation: please ask Habasit.
Recommendation
Do not go below initial elongation (epsilon) ~ 0.3%, Install the slack belt and tension until running perfectly under
the full belt load
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in
their original packaging. Check Link for Storage requirements:
"https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"
No danger and limitation
the full belt load
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in
their original packaging. Check Link for Storage requirements:
"https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"
No danger and limitation