APH120FBS Habasit Conveyor Belt
Main Industry Segments
Airport, Distribution centers, Parcel distribution / Overnight carrier
Special Features
Flame retardant, High strength
|
|
Product Construction / Design
Conveying Side Material |
Polyester fabric (PET) impregnated with polyvinylchloride (PVC) |
Conveying Side Surface |
Impregnated Fabric |
Conveying Side Property |
Non-adhesive |
Conveying Side Color |
Black |
Traction Layer (Material) |
Polyester (PET) |
Number of Fabrics |
1 |
Pulley Side Material |
Polyester fabric (PET) impregnated with polyvinylchloride (PVC) |
Pulley Side Surface |
Impregnated Fabric |
Pulley Side Property |
Non-adhesive |
Pulley Side Color |
Black |
Product Characteristics
Antistatically equipped |
No |
Adhesive free joining method |
Yes |
Flammability |
Flame retardant, Flame retardant to ASTM D-378 |
Food Suitablilty, FDA Conformance |
No |
Food Suitability, USDA Conformance |
No use intended |
Food Suitability, EU Conformance |
No |
Technical Data
Thickness of Belt |
3.2 mm |
0.13 inch |
Mass of Belt (belt weight) |
2.9 kg/m² |
0.590 lb/sqft |
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155) |
21 N/mm |
120 lbf/in |
Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181) |
8.3 N/mm |
47 lbf/in |
Min. Operating Temperature Admissible (continuous) |
-18 °C |
0 °F |
Max. Operating Temperature Admissible (continuous) |
82 °C |
180 F |
Coefficient of friction (pulley side / steel driving pulley) |
0.15 |
- |
Coefficient of friction (pulley side / driving pulley with friction cover) |
0.35 |
- |
Coefficient of friction (pulley side / pickled steel slider bed) |
0.35 |
- |
Coefficient of friction (pulley side / phenolic resin slider bed) |
0.35 |
- |
Coefficient of friction (pulley side / stainless steel slider bed) |
0.25 |
- |
Seamless manufacturing width |
1829 mm |
72 in |
On request other seamless manufacturing width |
1524 mm |
60 inch |
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Joining Method
|
Clipper #2HT
|
Joining method |
Unit |
Clipper #2HT |
Flexproof 10 x 80 |
Thermofix |
Pulley diameter (minimum) |
mm/inch |
79/3.10 |
76/3.00 |
76/3.00 |
Pulley diameter minimum with counter flection |
mm/inch |
79/3.10 |
76/3.00 |
76/3.00 |
Admissible tensile force per unit of width Admissible tensile force per unit of width at max. operating temperature |
N/mm lbf/in |
21 120 6.7 38 |
- |
- |
Slider bed suitable |
- |
Yes |
Yes |
Yes |
Carrying rollers suitable |
- |
Yes |
Yes |
Yes |
Troughed installation suitable |
- |
- |
- |
- |
Powerturns / curved installations |
- |
No |
No |
Value |
Knife-edge (nosebar) suitable |
- |
No |
No |
Value |
Metal detector suitable |
- |
No |
No |
No |
Low Noise Applications |
- |
No |
No |
No |
Chemical Resistance
Link to 'Chemical Resistance Information': https://rims.habasit.com
Mode of Use or Conveyance
Diverting, Horizontal
Calculations
For most applications calculation is not required. Should you still need a calculation: please ask Habasit.
Recommendation
Do not go below initial elongation (epsilon) ~ 0.5%, Install the slack belt and tension until running perfectly under
the full belt load
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in
their original packaging. Check Link for Storage requirements:
"https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"
No danger and limitation
the full belt load
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in
their original packaging. Check Link for Storage requirements:
"https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"
No danger and limitation