A200COS-B Habasit Conveyor Belt
Main Industry Segments
Distribution centers, General conveying
Special Features
Temperature variation resistant
|
|
Product Construction / Design
Conveying Side Material |
Polyvinylchloride (PVC) |
Conveying Side Surface |
Smooth |
Conveying Side Property |
Adhesive |
Conveying Side Color |
Black |
Traction Layer (Material) |
Polyester (PET) |
Number of Fabrics |
1 |
Pulley Side Material |
Polyester fabric (PET) impregnated with polyvinylchloride (PVC) |
Pulley Side Surface |
Fabric |
Pulley Side Property |
Non-adhesive |
Pulley Side Color |
Black |
Product Characteristics
Antistatically equipped |
No |
Adhesive free joining method |
Yes |
Flammability |
No specific flammability prevention property |
Food Suitablilty, FDA Conformance |
No |
Food Suitability, USDA Conformance |
No use intended |
Food Suitability, EU Conformance |
No |
Technical Data
Thickness of Belt |
5.2 mm |
0.21 inch |
Mass of Belt (belt weight) |
6.2 kg/m² |
1.270 lb/sqft |
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155) |
31 N/mm |
175 lbf/in |
Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181) |
6.3 N/mm |
36 lbf/in |
Min. Operating Temperature Admissible (continuous) |
-23 °C |
-10 °F |
Max. Operating Temperature Admissible (continuous) |
82 °C |
180 F |
Coefficient of friction (pulley side / steel driving pulley) |
0.20 |
- |
Coefficient of friction (pulley side / driving pulley with friction cover) |
0.35 |
- |
Coefficient of friction (pulley side / pickled steel slider bed) |
0.25 |
- |
Coefficient of friction (pulley side / phenolic resin slider bed) |
0.25 |
- |
Coefficient of friction (pulley side / stainless steel slider bed) |
0.30 |
- |
Seamless manufacturing width |
1829 mm |
72.00 in |
On request other seamless manufacturing width |
1524 mm |
60 inch |
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Joining Method
|
Clipper #4 or Flexproof 10 x 80 |
Joining method |
Unit |
Clipper #4 |
Flexproof 10 x 80 |
Pulley diameter (minimum) |
mm/inch |
152/6.00 |
152/6.00 |
Pulley diameter minimum with counter flection |
mm/inch |
165/6.50 |
165/6.50 |
Admissible tensile force per unit of width |
N/mm lbf/in |
32 183 |
- |
Slider bed suitable |
- |
Yes |
Yes |
Carrying rollers suitable |
- |
Yes |
Yes |
Troughed installation suitable |
- |
- |
- |
Powerturns / curved installations |
- |
No |
No |
Knife-edge (nosebar) suitable |
- |
No |
No |
Low noise applications |
- |
No |
No |
Metal detector suitable |
- |
No |
No |
Chemical Resistance
Link to 'Chemical Resistance Information': https://rims.habasit.com
Mode of Use or Conveyance
Declined, Horizontal, Inclined
Calculations
For most applications calculation is not required. Should you still need a calculation: please ask Habasit.
Recommendation
Do not go below initial elongation (epsilon) ~ 0.5%, Install the slack belt and tension until running perfectly under
the full belt load
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in
their original packaging. Check Link for Storage requirements:
"https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"
No danger and limitation
the full belt load
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in
their original packaging. Check Link for Storage requirements:
"https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"
No danger and limitation