A150FBS-B Habasit Conveyor Belt
Main Industry Segments
Distribution centers, General conveying
Special Features
Temperature variation resistant
|
|
Product Construction / Design
Conveying Side Material |
Polyester fabric (PET) impregnated with polyvinylchloride (PVC) |
Conveying Side Surface |
Fabric |
Conveying Side Property |
Non-adhesive |
Conveying Side Color |
Black |
Traction Layer (Material) |
Polyester (PET) |
Number of Fabrics |
1 |
Pulley Side Material |
Polyvinylchloride (PVC) |
Pulley Side Surface |
Fabric |
Pulley Side Color |
Non-adhesive |
Product Characteristics
Antistatically equipped |
No |
Adhesive free joining method |
Yes |
Flammability |
No specific flammability prevention property |
Food Suitablilty, FDA Conformance |
No |
Food suitability, USDA recommendations |
No use intended |
Food suitability, EU conformance |
No |
Technical Data
Thickness of Belt |
3.5 mm |
0.14 inch |
Mass of Belt (belt weight) |
4.0 kg/m |
0.810 lb/sqft |
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155 / EN ISO 21181) |
30 N/mm |
170 lbf/in |
Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181) |
12 N/mm |
69 lbf/in |
Min. Operating Temperature Admissible (continuous) |
-23 C |
-10 F |
Max. Operating Temperature Admissible (continuous) |
82 C |
180 F |
Coefficient of friction (pulley side / steel driving pulley) |
0.30 |
- |
Coefficient of friction (pulley side / driving pulley with friction cover) |
0.40 |
- |
Coefficient of friction (pulley side / pickled steel slider bed) |
0.35 |
- |
Coefficient of friction (pulley side / phenolic resin slider bed) |
0.35 |
- |
Coefficient of friction (pulley side / stainless steel slider bed) |
0.35 |
- |
Seamless manufacturing width |
1829 mm |
72.00 inch |
On request other seamless manufacturing width |
1524 mm |
60 inch |
On request further seamless manufacturing width |
1524 mm |
60 inch |
All data are approximate values under standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Joining Method
|
Clipper #1 or Flexproof 10 x 80 |
Joining Method |
unit |
Clipper #1 |
Flexproof 10 x 80 |
Pulley diameter (minimum) |
mm/inch |
76/3.00 |
76/3.00 |
Pulley diameter minimum with counter flection |
mm/inch |
76/3.00 |
76/3.00 |
Admissible tensile force per unit of width |
N/mm lbf/in |
16 92 |
- |
Admissible tensile force per unit of width at max. operating temperature |
N/mm lbf/in |
11 30 |
- |
Slider bed suitable |
- |
Yes |
Yes |
Carrying rollers suitable |
- |
Yes |
Yes |
Troughed installation suitable |
- |
No |
No |
Powerturns / curved installations |
- |
No |
No |
Knife-edge (nosebar) suitable |
- |
No |
No |
Metal detector suitable |
- |
No |
No |
Chemical Resistance
Link to 'Chemical Resistance Information: https://rims.habasit.com
Mode of Use or Conveyance
Horizontal
Calculations
For most applications calculation is not required. Should you still need a calculation: please ask Habasit.
Recommendation
Do not go below initial elongation (epsilon) ~ 0.5%, Install the slack belt and tension until running perfectly under
the full belt load
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in
their original packaging. Check Link for Storage requirements:
"https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"
No danger and limitation
the full belt load
Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in
their original packaging. Check Link for Storage requirements:
"https://tdm.habasit.com/pds/en-us/Storage%20of%20Habasit%20material.pdf"
No danger and limitation