A120CRES-B Conveyor Belt
Main Industry Segments
Distribution centers, Horticulture
Applications
Decline belt, Incline belt
Special Features
Temperature variation resistant
|
|
Product Construction / Design
Conveying Side Material |
Polyvinylchloride (PVC) |
Conveying Side Surface |
Crescent top structure |
Conveying Side Property |
Adhesive |
Conveying Side Color |
Black |
Traction Layer (Material) |
Polyester (PET) |
Number of Fabrics |
1 |
Pulley Side Material |
Polyester fabric (PET) impregnated with polyvinylchloride (PVC) |
Pulley Side Surface |
Fabric |
Pulley Side Property |
Adhesive |
Pulley Side Color |
Black |
Product Characteristics
Antistatically equipped |
No |
Adhesive free joining method |
Yes |
Flammability |
No specific flammability prevention property |
Food Suitablilty, FDA Conformance |
No |
Food Suitability, USDA Conformance |
No use intended |
Food suitability, EU conformance |
No |
Technical Data
Thickness of Belt |
6.1 mm |
0.24 Inch |
Mass of Belt (belt weight) |
4.9 kg/m |
1.000 lb/sqft |
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155) |
26 N/mm |
150 lbf/in |
Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181) |
10 N/mm |
59 lbf/in |
Min. Operating Temperature Admissible (continuous) |
-34 C |
-30 F |
Max. Operating Temperature Admissible (continuous) |
82 C |
180 F |
Coefficient of friction (pulley side / steel driving pulley) |
0.15 |
- |
Coefficient of friction (pulley side / driving pulley with friction cover) |
0.35 |
- |
Coefficient of friction (pulley side / pickled steel slider bed) |
0.30 |
- |
Coefficient of friction (pulley side / phenolic resin slider bed) |
0.30 |
- |
Coefficient of friction (pulley side / stainless steel slider bed) |
0.35 |
- |
Seamless manufacturing width |
1829 mm |
72.00 in |
On request other seamless manufacturing width |
1524 mm |
60 in |
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties
Joining Method
|
Flexproof 10 x 80
|
Pulley diameter (minimum) |
mm/inch |
89/3.50 |
89/3.50 |
89/3.50 |
Pulley diameter minimum with counter flection |
mm/inch |
114/4.50 |
114/4.50 |
114/4.50 |
Admissible tensile force per unit of width |
N/mm lbf/in |
16 91 |
- |
- |
Admissible tensile force per unit of width at max. operating temperature |
N/mm lbf/in |
7.4 42 |
- |
- |
Slider bed suitable |
- |
Yes |
Yes |
Yes |
Carrying rollers suitable |
- |
Yes |
Yes |
Yes |
Troughed installation suitable |
- |
No |
No |
No |
Powerturns / curved installations |
- |
No |
No |
No |
Knife-edge (nosebar) suitable |
- |
No |
No |
No |
Metal detector suitable |
- |
No |
No |
No |
Low noise applications |
- |
No |
No |
No |
Chemical Resistance
Link to 'Chemical Resistance Information': https://rims.habasit.com
Mode of Use or Conveyance
Declined, Horizontal, Inclined, Troughed
Calculations
For most applications calculation is not required. Should you still need a calculation: please ask Habasit.
Recommendation
Do not go below initial elongation (epsilon) ~ 0.3% Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging.
This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user's analysis in the respective environment.
This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user's analysis in the respective environment.