A-4LT Power Transmission Belts

Main Industry Segments

Various Industries

Applications

Driving Belt, Power Tansmission Belts

Special Features 

Robustness, Wear Resistant, Versatile

Product Construction / Design

Pulley Side Material 
Chrome Leather
Pulley Side Surface 
Leather Structure
Pulley Side Color
Light Gray
Traction Layer (Material)
Polyamide (PA)
Number of Fabrics
1
Opposite Side Material
Acrylonitrile-Butadiene-Rubber (NBR)
Opposite Side Surface
Impregnated Fabric
Opposite Side Color
Green

Product Characteristics 

Drive Determination
One-Sided Power Transmission
Antistatically Equipped
No
Adhesive Free Joining Method
No
Food Suitablilty, FDA Conformance
​No
Food Suitability, EU Conformance
No

Technical Data 

Thickness of Belt 
4.7 mm
0.19 Inch
Mass of Belt (belt weight)
4.6 kg/m
0.942 lb/sqft
Tensile Force for 1% Elongation (k1% Static) per Unit of Width (Habasit Standard SOP3-155)
18 N/mm
103 lbf/in
Nominal Peripheral Force Per Unit of Width
39 N/mm
223 lbf/in
Min. Operating Temperature Admissible (continuous)
-20 C
-4 F
Max. Operating Temperature Admissible (continuous)
80 C
176 F
Seamless Manufacturing Width
460 mm
18.11 Inch
All data are approximate values standard climatic conditions: 23 C/73 F, 50% relative humidity (DIN 50005/ISO 554)
Joining Related Properties

Joining Method 

Therofix 60
Pulley Diameter (minimum)
mm/inch
300/11.81
Pulley Diameter Minimum with Counter Flection
mm/inch
300/11.81

Chemical Resistance

Link to 'Chemical Resistance Information: https://rims.habasit.com

Mode of Use or Conveyance 

Power Transmission

Calculations 

With power transmission belts a calculation at least of the belt width and initial elongation is highly recommended. For this serves the Habasit  calculation program. The easiest way is to have belt drives calculated by Habasit representatives. 

Recommendation

Observe the indications of the machine handbook from the machine manufacturers.

Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging. 

This product has not been tested according to ATEX Standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 2014/34/EU) and therefore is subject to user's analysis in the respective environment.